features Archives

Classification and characteristics of ball valve

August 14, 2020

There are different ways of classification of ball valves.

Function classification:
1. Bypass valve: The ball valve is generally opened by static water, so the bypass valve is set to be pressed first, that is, both sides are filled with water;

ball valve (6)

2. Air valve: when filling with water, the buoy will automatically close the valve when the air is removed; when draining, the buoy will drop by itself when it is used for replenishing air;

3. Pressure relief valve: When opening and closing the valve, remove the pressure water between the valve and the sealing cover to avoid wearing the sealing cover;

4. Drain valve: drain the sewage in the lower part of the ball shell.

Transmission classification:
1. Pneumatic ball valve

2. Electric ball valve

3. Hydraulic ball valve

4. Pneumatic hydraulic ball valve

5. Electro-hydraulic ball valve

6. Turbine drive ball valve

Classification characteristics of ball valve:

Ball valves are divided into: floating ball valve, fixed ball valve, orbital ball valve, V-shaped ball valve, three-way ball valve, stainless steel ball valve, cast steel ball valve, forged steel ball valve, ash unloading ball valve, anti-sulfur ball valve, pneumatic ball valve, electric ball valve, card sleeve Ball valves, welded ball valves.

Classified by shell/body material, ball valves can be divided into:

1. Metal material valves: such as carbon steel valves, alloy steel valves, stainless steel valves, cast iron valves, titanium alloy valves, Monel valves, copper alloy valves, aluminum alloy valves, lead alloy valves, etc.

2. Metal valve body lining valves: such as rubber-lined valves, fluorine-lined valves, lead-lined valves, plastic-lined valves, and enamel-lined valves.

3. Valves of non-metallic materials: such as ceramic valves, glass valves, and plastic valves.

There are many domestic manufacturers of ball valves, and most of the connection sizes are not uniform. Mainly divided into the following categories:

The ball of the ball valve is floating. Under the action of the medium pressure, the ball can produce a certain displacement and press tightly on the sealing surface of the outlet end to ensure that the outlet end is sealed.

Structural features of ball valve:
The sealing performance is good, but all the load of the sphere bearing the working medium is transmitted to the outlet sealing ring. Therefore, it is necessary to consider whether the sealing ring material can withstand the working load of the sphere medium. When subjected to higher pressure impact, the sphere may deviate . This structure is generally used for medium and low pressure ball valves.

The ball of the ball valve is fixed and does not move when pressed. The fixed ball valve is equipped with a floating valve seat. After receiving the pressure of the medium, the valve seat will move, so that the sealing ring is pressed tightly on the ball to ensure sealing. Bearings are usually installed on the upper and lower shafts of the ball, and the operating torque is small, which is suitable for high pressure and large diameter valves.

In order to reduce the operating torque of the ball valve and increase the reliability of the seal, an oil-sealed ball valve has appeared, which not only injects a special lubricant between the sealing surfaces to form a layer of oil film, which enhances the sealing performance and reduces the operating torque. Suitable for high pressure and large diameter ball valves.

Flexible features of ball valve:

The ball of the ball valve is elastic. Both the ball and the valve seat sealing ring are made of metal materials, and the sealing specific pressure is very large. The pressure of the medium itself cannot meet the sealing requirements, and external force must be applied. This valve is suitable for high temperature and high pressure media.

The elastic sphere is made by opening an elastic groove on the lower end of the inner wall of the sphere to obtain elasticity. When closing the passage, use the wedge-shaped head of the valve stem to expand the ball and press the valve seat to seal. Loosen the wedge-shaped head before rotating the sphere, and the sphere will return to its original shape, so that there is a small gap between the sphere and the valve seat, which can reduce the friction and operating torque of the sealing surface.

Qv347, Qv647, Qv947 V-type regulating ball valve

The Qv347, Qv647, and Qv947 V-type regulating ball valves have a shearing effect on the valve seat because the ball core has a V-shaped structure. Therefore, it is suitable for the control of relevant process parameters in the suspension medium containing fibers or small solid particles in papermaking, chemical, metallurgical and other industrial enterprises. It is especially suitable for the pulp, white water, black liquor and white water in the pulp and paper production process. Automatic adjustment of the fluid of suspended particles such as liquid and thick and turbid slurry fluid medium.

This V-shaped ball valve is a fixed ball valve and also a single-seat sealed ball valve. The adjustment performance is the best among ball valves, the flow characteristics are equal percentages, and the adjustable ratio is 100:1. It has a shearing effect between the V-shaped incision and the metal valve seat, which is especially suitable for media containing fibers, small solid particles, slurry, etc.

Three-way ball valve has T type and L type. The T type can connect three orthogonal pipelines with each other and cut off the third channel, which can split and merge. The L-shape can only connect two orthogonal pipelines, and cannot maintain the third pipeline to communicate with each other at the same time. It only plays a role of distribution.

Characteristics of ball valve

August 14, 2020

Features of ball valve:
1. Wear resistance; because the valve core of the hard-sealed ball valve is spray-welded alloy steel,

ball valve (2)

The sealing ring is made of alloy steel surfacing, so the hard sealing ball valve will not produce too much wear when opening and closing. (Its hardness coefficient is 65-70):

Second, the sealing performance is good; because the sealing of the hard-seal ball valve is manually ground, it can be used until the valve core and the sealing ring are completely matched. So his sealing performance is reliable.

3. The switch is light; since the bottom of the sealing ring of the hard-sealed ball valve adopts a spring to make the sealing ring and the valve core tightly hug together, the switch is very light when the external force exceeds the preload of the spring.

4. Long service life: It has been widely used in petroleum, chemical industry, power generation, papermaking, atomic energy, aviation, rockets and other departments, as well as people’s daily life.

The pneumatic ball valve has a simple and compact structure, reliable sealing, and convenient maintenance. The sealing surface and the spherical surface are always in a closed state, which is not easy to be eroded by the medium. It is easy to operate and maintain. It is suitable for general working media such as water, solvent, acid and natural gas. It is mainly used for cutting off. Or connect the medium in the pipeline, and can also be used for fluid adjustment and control.

Compared with other types of valves, pneumatic ball valves have angular stroke output torque, quick opening, stable and reliable, wide application, and the following advantages:

1. The thrust bearing reduces the friction torque of the valve stem, which can make the valve stem operate smoothly and flexibly for a long time.

2. Anti-static function: a spring is set between the ball, valve stem and valve body, which can lead out the static electricity generated during the switching process.

3. Since materials such as polytetrafluoroethylene have good self-lubricating properties and small friction loss with the ball, the pneumatic ball valve has a long service life.

4. Small fluid resistance: Pneumatic ball valves have the smallest fluid resistance among all valve categories. Even the reduced diameter pneumatic ball valves have relatively small fluid resistance.

5. Reliable valve stem sealing: Since the valve stem only rotates and does not move up and down, the packing seal of the valve stem is not easy to be damaged, and the sealing ability increases with the increase of the medium pressure.

6. Good sealing performance of the valve seat: The sealing ring made of elastic materials such as polytetrafluoroethylene is easy to seal in structure, and the valve sealing capacity of the pneumatic ball valve increases with the increase of the medium pressure.

7. The fluid resistance is small, and the full-bore ball valve basically has no flow resistance.

8. Simple structure, small size and light weight.

9. Close and reliable. It has two sealing surfaces, and the sealing surface materials of the ball valve are widely used in various plastics, which have good sealing performance and can achieve complete sealing. It has also been widely used in vacuum systems.

10. Convenient operation, rapid opening and closing, only need to rotate 90° from fully open to fully closed, which is convenient for remote control.

11. Convenient maintenance, simple structure of the ball valve, generally movable sealing ring, easy to disassemble and replace.

12. When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium. When the medium passes, it will not cause erosion of the valve sealing surface.

13. It has a wide range of applications, with a diameter ranging from a few millimeters to a few meters, and can be applied from high vacuum to high pressure.

14. Because the ball valve has wiping properties during opening and closing, it can be used in media with suspended solid particles.

15. The processing precision is high, the cost is expensive, and it is not suitable for use in high temperature. If there are impurities in the pipeline, it is easy to be blocked by the impurities, causing the valve to fail to open.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Knife gate valve introduction and its characteristics

August 14, 2020

Knife gate valve entered China in the 1980s. In less than two decades, its use has expanded from ordinary fields to a

Knife gate valve (1)

wider range of industries, from coal preparation, gangue discharge, and slag discharge in mines and power plants to Urban sewage treatment has evolved from general industrial pipelines to specialized pipeline systems for food, sanitation, and medicine.

What is a knife gate valve:
Knife gate valve-also known as knife door valve, knife-type slurry valve, entered my country in the 1980s. In less than two decades, its scope of use has expanded from the general field to a wider range of industries. Coal preparation, gangue discharge and slag discharge from mines and power plants. It has developed into urban sewage treatment, from general industrial pipelines to professional pipeline systems such as food, sanitation, and medicine. The ultra-thin knife gate valve completely solves the large flow resistance of ordinary gate valves, flat gate valves, ball valves, globe valves, regulating valves, butterfly valves and other valves with its advantages of small size, small flow resistance, light weight, easy installation, and easy disassembly. , Heavy weight, difficult installation, large area and other difficult problems. After the emergence of knife gate valves, a large number of general shut-off valves and regulating valves have been replaced. To date, the world’s largest consumption of knife gate valves is the United States and Japan.

Characteristics of knife gate valve:

Knife gate valve-

1. Valve control can be used for local and remote control, and can also realize remote position display and remote centralized control according to user requirements.

2. Light weight: The body is made of carbon steel, and the weight is about 20%-30% lighter than the traditional gate valve. It is easy to install and maintain.

3. The use of this valve can improve the closing and sealing performance of the conveying pipeline system, prevent leakage to the maximum extent, and play a positive role in improving production efficiency and protecting the environment.

4. The sealing surface is made of highly wear-resistant and corrosion-resistant ceramic materials, and the use of inlay technology has high corrosion resistance and good wear resistance, so that the valve has a long life and the cost performance is 10 times higher than that of ordinary valves.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Features and working principle of silent check valve

August 11, 2020

Silent check valve refers to a valve that automatically opens and closes the disc depending on the flow of the medium itself to prevent the medium from flowing back. It is also called check valve, one-way valve, silence check valve, reverse flow valve, and back pressure valve. Check valve is a kind of automatic valve, its main function is to prevent the back flow of the medium, prevent the pump and drive motor from reversing, and discharge the container medium. Check valves can also be used to supply pipelines for auxiliary systems whose pressure may rise above the system pressure. Check valves can be divided into swing check valves (rotating according to the center of gravity) and lift check valves (moving along the axis).
Features of silent check valve:
1. The valve clack adopts a “bullet” shape design, and the valve body adopts a “waist drum” shape design to improve the flow direction of the medium and reduce the flow resistance coefficient.

2. The valve adopts a short structure. Although the head loss is slightly larger than that of the lift-type silent check valve, it is small in size and inexpensive.

3. Compact structure, non-metallic lubrication sleeve is installed between the guide shaft and the guide frame, and the valve flap can be raised and lowered flexibly without locking phenomenon.

4. The skeleton type rubber sealing ring is directly embedded in the valve body, which avoids the direct erosion of the sealing ring by the medium for a long time, and the service life is si

silent check valve (11)

gnificantly prolonged, and it is strong and durable.

5. The valve flap has a short opening and closing stroke, which can effectively prevent water hammer

6. It is suitable for water supply and drainage system and high-rise building pipe network. It can be installed at the outlet of the pump. The structure is slightly modified, and it can be used as a suction bottom valve, but it is not suitable for sewage pipe network.

7. It has small size, light weight, low fluid resistance, fatigue resistance and long life
working principle of silent check valve:
When the medium flows in the specified direction, the valve flap is opened by the force of the medium; when the medium flows backward, the valve flap is tightly closed with the sealing surface of the valve seat due to the weight of the valve flap and the opposing force of the medium. Closed to achieve the purpose of preventing the backflow of the medium.

Check valve is an automatic valve, its main function is to prevent the back flow of the medium, prevent the pump and drive motor from reversing, and the release of the container medium. Check valves can also be used to supply pipelines for auxiliary systems whose pressure may rise above the system pressure.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Materials, installation and features of vertical check valve

July 31, 2020

Part materials of vertical check valve:
Construction and installation points for vertical check valve:

1) The installation position, height, and direction of inlet and outlet must meet the design requirements. Note that

silent check valve (9)

the direction of medium flow should be consistent with the direction of the arrow marked on the valve body, and the connection should be firm and tight.

2) Visual inspection must be carried out before the valve is installed. The nameplate of the valve should comply with the current national standard “General Valve Marking” GB 12220. For valves with a working pressure greater than 1.0 MPa and a cut-off function on the main pipe, the strength and tightness performance test should be carried out before installation, and the valve can be used only after it is qualified. During the strength test, the test pressure is 1.5 times the nominal pressure and the duration is not less than 5 minutes. The valve housing and packing should be qualified without leakage. During the tightness test, the test pressure is 1.1 times the nominal pressure; the duration of the test meets the requirements of GB 50243

Part name: material

Valve body, bonnet, valve clap with Part Material: Carbon Steel

Valve surface Sealing: with Part Material: Weld overlay hard alloy.

Valve shaft: Carbon steel

Shaft Pins: Chrome stainless steel

Gasket: flexible graphite + SS304

Install and use of vertical check valve:
1. Both ends of the valve passage must be blocked and there is a dry and ventilated room. If it is stored for a long time, it should be checked frequently to prevent corrosion.

2. The valve should be cleaned before installation and the defects caused during transportation should be eliminated.

3. When installing, you must carefully check whether the signs and nameplates on the valve meet the requirements for use.

4. The valve is installed on the vertical pipeline.

main feature of vertical check valve:
Vertical check valve has the following two advantages:

1. The three-dimensional check valve is divided into flange and wafer, which has the characteristics of simple structure, few parts and light weight. Vertical check valves are mainly used in various working conditions that need to prevent medium backflow.

2. When the vertical check valve is used for vertical installation, no spring is required, and the weight of the valve flap and the pressure of the fluid return flow are used for check.

Features and application area of double eccentric butterfly valve

July 24, 2020

Double eccentric butterfly valve is also called high-performance butterfly valve. It is mainly used for drainage of water plants, power plants, steel smelting, chemical

5 double-eccentric-butterfly-valve-2

industry, water source engineering, environmental facility construction, etc. It is especially suitable for water pipelines and used as regulation and interception equipment. Compared with the centerline butterfly valve, the double eccentric butterfly valve is more resistant to high pressure, has a longer life and good stability.
Another name: high performance butterfly valve
Applicable area: water plant, power plant, steel mill smelting, chemical industry
Features: Longer life and good stability

use of double eccentric butterfly valve:
Double eccentric butterfly valve is also called high-performance butterfly valve. It is mainly used for drainage of water plants, power plants, steel smelting, chemical industry, water source engineering, environmental facility construction, etc. It is especially suitable for water pipelines and used as regulation and interception equipment. Compared with the centerline butterfly valve, the double eccentric butterfly valve is more resistant to high pressure, has a longer life and good stability. Compared with other valves, the larger the caliber, the lighter the material, and the lower the cost. But because there is a butterfly plate in the middle and the flow resistance is large, a butterfly valve smaller than DN200 is meaningless.

working principle of double eccentric butterfly valve:
The double eccentric butterfly valve is further improved on the basis of the single eccentric butterfly valve. Its structural feature is that the axis of the valve stem deviates from the center of the butterfly plate and the center of the body. The double eccentric effect enables the butterfly plate to be released from the valve seat immediately after the valve is opened, which greatly eliminates unnecessary excessive extrusion and scratching of the butterfly plate and the valve seat, reduces the opening resistance, reduces wear and improves The life of the valve seat is improved. The scraping is greatly reduced, and at the same time, the double eccentric butterfly valve can also use a metal seat, which improves the application of the butterfly valve in the high temperature field.

Structural features
1 Reasonable design, compact structure, easy assembly and disassembly, and easy maintenance.
2 The eccentric structure is adopted to reduce the friction of the sealing ring and prolong the service life of the valve.
3 Completely sealed, zero leakage. Can be used in ultra-high vacuum conditions
4 Replace the valve plate sealing ring, butterfly plate, shaft and other materials, which can be applied to a variety of media and different temperatures

Features and structure drawings of flange butterfly valve

July 23, 2020

The main features of flange butterfly valve are:

Small and light, easy to disassemble and repair, and can be installed in any position.
U type flange butterfly valve (2)
The structure is simple and compact, the operating torque is small, and the 90° turn to open quickly.
The flow characteristics tend to be straight, and the regulation performance is good.
The connection between the butterfly plate and the valve stem adopts a pinless structure, which overcomes possible internal leakage points.
The outer circle of the butterfly plate adopts a spherical shape, which improves the sealing performance and prolongs the service life of the valve. It still maintains zero leakage after opening and closing more than 50,000 times under pressure.
The seal can be replaced, and the seal is reliable to achieve two-way sealing.
The butterfly plate can be sprayed with a coating layer, such as nylon or PTFE, according to user requirements.
The valve can be designed as flange connection and wafer connection.
The driving mode can be manual, electric or pneumatic.

Flange butterfly valves are suitable for water supply and drainage, sewage, food, heating, gas, ships, hydropower, metallurgy, energy systems, textiles and other industries with a temperature of ≤120℃ or ≤150℃ and a nominal pressure of ≤1.6MPa. They are especially suitable for two-way sealing and In occasions where the valve body is prone to rust, it is used as a flow adjustment and interception medium.

Internal structure diagram of flange butterfly valve: see attached below

Clamp flange connection sequence:
1. Piping: Use a pipe cutter or a grinding wheel cutting machine to cut the stainless steel pipe vertically according to the required length, trim the end burr, and make it round;

2. Welding: The left and right tapered flange flange pieces (with grooves, specially used for embedding the flange gasket on both sides) are respectively welded to the two piping ports that need to be connected by argon tungsten arc welding (TIG welding) ；

3. Gasket: double-sided flange gaskets are lined between the left and right flanges;

4. Fastening: clamp the two flanges with a clamp, and then use a fastening screw (hexagon socket bolt) to clamp the flange or fasten the handle (one end of the external thread is connected with the internal thread of the handle, and one end is flexibly connected with a fixed rivet) .

Executive standard: API, DIN, BS, EN, GB and other international standards.

Tanghai Valve is the best manufacturer of flange butterfly valve in China. We produce the best quality products with competitive low prices. Our products use advanced manufacturing technology, and strictly conform to API, DIN, BS, EN, GB and other international standards. The main products are butterfly valves, gate valves, check valves, globe valves, valve parts (Valve body, Valve disc, Valve shaft, Valve seat…), etc. Our products are widely used in various fields such as marine industry, shipbuilding, petrochemical, metallurgy, water treatment, fire fighting, water supply and drainage, etc. The company has won unanimous recognition and praise from customers with high quality and good reputation.

Uses and characteristics of manual butterfly valve (4)

July 21, 2020

Installation and maintenance of manual butterfly valve:
During installation, the disc should stop in the closed position. The opening position should be determined according to the rotation angle of the butterfly plate. For

wafer type butterfly valve, with handle (13)

the butterfly valve with bypass valve, the bypass valve should be opened before opening, and the installation should be carried out according to the manufacturer’s installation instructions. The heavy butterfly valve should be set with a firm foundation.

Comparison of ordinary butterfly valve and gate valve:

Which of the ordinary butterfly valve or gate valve with the same nominal pressure and nominal diameter has better tightness and is not easy to leak?

The airtightness of the gate valve is better than that of the butterfly valve, but there are also manufacturers’ butterfly valves that have better airtightness. This type of valve should generally be installed horizontally in the pipeline.

The gate valve is large in size and takes up a lot of space.

The butterfly valve is small in size and takes up little space.

When selecting, the temperature of the medium, the sealing of the valve and the packing must also be considered.

The specification stipulates that butterfly valves with a nominal diameter greater than 50 are used.

The elastic metal sealing butterfly valve is a national key new product. The high-performance manual butterfly valve adopts a double eccentric and a special oblique cone oval sealing structure. It solves the shortcoming of the traditional eccentric butterfly valve that the sealing surface is still in sliding contact friction at the moment of opening and closing 0°～10°, and the sealing surface of the butterfly plate is separated at the moment of opening, and the effect of sealing when the contact is closed is achieved. Good purpose.

Material of manual butterfly valve:
1. Valve body material: gray cast iron, ductile iron, cast steel, aluminum alloy, stainless steel, etc.;

2. Valve plate material: duplex stainless steel, nylon 11 plate, galvanized plate, aluminum bronze;

3. Valve seat material: nitrile rubber, EPDM, fluorine rubber, silicone rubber, PTFE.

Ranges of application for manual butterfly valve:
It is widely used in the pipelines of petroleum, chemical, food, medicine, papermaking, hydropower, shipbuilding, water supply and drainage, metallurgy, oil, energy and other systems. It is suitable for a variety of corrosive gases, liquids, semi-liquid and solid powder media.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Uses and characteristics of manual butterfly valve (3)

July 21, 2020

Features of manual butterfly valve:
The butterfly valve opening and closing part is a disc-shaped butterfly plate, which rotates around its own axis in the valve body to achieve opening and closing or adjustment of the valve is called a butterfly valve. The butterfly valve is usually less than 900 from fully open to fully closed. The butterfly valve and the butterfly rod

Double flange butterfly valve (7)

themselves are not self-locking. For the positioning of the butterfly plate, a worm gear reducer must be installed on the valve rod. The use of worm gear reducer can not only make the butterfly plate have self-locking ability, make the butterfly plate stop at any position, but also improve the operation performance of the valve. Industrial-specific butterfly valves are characterized by high temperature resistance, high applicable pressure range, large nominal diameter of the valve, the valve body is made of carbon steel, and the sealing ring of the valve plate uses a metal ring instead of a rubber ring. Large high-temperature butterfly valves are manufactured by welding steel plates, and are mainly used for flue ducts and gas pipes for high-temperature media.

Advantages of manual butterfly valve:
The opening and closing is convenient and rapid, labor-saving, low fluid resistance, and can be operated frequently. Simple structure, small size and light weight. Mud can be transported, with the least accumulation of liquid at the pipe mouth. Under low pressure, good sealing can be achieved. Good adjustment performance.

Disadvantages of manual butterfly valves:
1. Use pressure and working temperature range are small.
2. Poor airtightness.

Classification of manufal butterfly valve:
According to the structure, it can be divided into offset plate type, vertical plate type, inclined plate type and lever type. According to the sealing form, it can be divided into two types: soft sealing type and hard sealing type. The soft seal type generally uses a rubber ring seal, and the hard seal type generally uses a metal ring seal. According to the connection type, it can be divided into flange connection and wafer connection; according to the transmission mode, it can be divided into manual, gear transmission, pneumatic, hydraulic and electric.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Uses and characteristics of manual butterfly valve (2)

July 21, 2020

Uses/application of manual butterfly valve:
Used in the gas pipeline in the sulfuric acid industry: the inlet and outlet of the blower in front of the furnace, the inlet and outlet of the relay fan, the electric demisting series and the connecting valve, the inlet and outlet of the S02 main blower, the adjustment of the converter, the inlet and outlet of the preheater, etc. and

ductile iron, DI, butterfly valve, manufacturer, center line, TH valve

the use of cut-off gas.

It is used in the sulfur burning, conversion and dry absorption sections of the sulfur-burning sulphuric acid plant. It is the preferred brand of valves for the sulphur-burning sulphuric acid plant. It is regarded by the majority of users as: good sealing performance, light operation, secondary corrosion, high temperature resistance, convenient operation, The flexible, safe and reliable butterfly valve has been widely used.

It is also widely used in: SO2, steam, air, gas, ammonia, CO2, oil, water, brine, lye, seawater, nitric acid, hydrochloric acid, sulfuric acid, phosphoric acid in the chemical, petrochemical, smelting, pharmaceutical, food and other industries It is used as a regulating and intercepting device on the pipeline of other medium.

Structural features of manual butterfly valve:

The unique design of three-way eccentricity enables frictionless transmission between the sealing surfaces and prolongs the service life of the valve.
Elastic seal is produced by torque.
The clever wedge-shaped design enables the valve to have an automatic sealing function that is tighter and tighter, and the sealing surfaces are compensated and leak-free.
Small size, light weight, light operation and easy installation.
Pneumatic and electric devices can be configured according to user requirements to meet the needs of remote control and program control.
The material of replacement parts can be applied to various media, and can be lining anti-corrosion (lining F46, GXPP, PO, etc.).
Diversified continuous structure: wafer, flange, butt welding.

Tianjin TanghaiDongyang Valve Co., Ltd. is one of the largest butterfly valve manufacturers in China, main products are butterfly valves, check valves.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Posts

Classification and characteristics of ball valve

Characteristics of ball valve

Knife gate valve introduction and its characteristics

Features and working principle of silent check valve

Materials, installation and features of vertical check valve

Features and application area of double eccentric butterfly valve

Features and structure drawings of flange butterfly valve

Uses and characteristics of manual butterfly valve (4)

Uses and characteristics of manual butterfly valve (3)

Uses and characteristics of manual butterfly valve (2)

TH VALVE • PROFESSIONAL VALVE MANUFACTURER

GET IN TOUCH WITH US