News & Events

The difference between globe valve and check valve

With the development of high-tech industry, various valves are often used in daily life. Today we will understand the difference between globe valves and check valves.

The difference between globe valve and check valve:
1. Check valve and stop valve are not the same thing, the difference between the two is mainly that the structure is

Globe valve (6)

Globe valve (6)

very different.

2. The check valve is a one-way valve, which automatically prevents the fluid from flowing in the reverse direction, without a knob, and cannot artificially block the forward flow.

3. The stop valve has a knob, which can artificially control the forward flow. Due to its special structure, even if there is no artificial pipe valve, the fluid cannot flow in the reverse direction.

Globe valve:

The globe valve, also known as the shut-off valve, is a forced sealing valve, so when the valve is closed, pressure must be applied to the disc to force the sealing surface to not leak. When the medium enters the valve from below the valve

lift-swing-check-valve-2

lift-swing-check-valve-2

disc, the resistance that the operating force needs to overcome is the friction force of the valve stem and the packing and the thrust generated by the pressure of the medium. The force of closing the valve is greater than the force of opening the valve, so the valve stem The diameter of the valve must be large, otherwise the valve stem will bend failure.
working principle of globe valve:
The globe valve, also called the cut-off valve, is one of the most widely used valves. The reason why it is so popular is that the friction between the sealing surfaces is small during the opening and closing process, which is relatively durable, has a low opening height, and is easy to manufacture. , Easy maintenance, not only suitable for medium and low pressure, but also suitable for high pressure. The closing principle of the globe valve is to rely on the pressure of the valve stem to make the sealing surface of the disc and the sealing surface of the valve seat tightly fit to prevent the medium from flowing. Our country’s valve “Sanhua” once stipulated that the flow direction of the stop valve should be from top to bottom, so there is directionality when installing. The structural length of the stop valve is longer than that of the gate valve, and the fluid resistance is large, and the sealing reliability is not strong during long-term operation.

Check valve:

Check valve refers to the valve that automatically opens and closes the disc depending on the flow of the medium itself to prevent the medium from flowing back, also known as check valve, one-way valve, reverse flow valve, and back pressure valve. Check valve is a kind of automatic valve, its main function is to prevent the back flow of the medium, prevent the pump and drive motor from reversing, and the discharge of the container medium.

working principle of check valve:
Check valve refers to the valve that automatically opens and closes the disc depending on the flow of the medium itself to prevent the medium from flowing back. It is also called check valve, one-way valve, reverse flow valve and back pressure valve. Check valve is a kind of automatic valve, its main function is to prevent the back flow of the medium, prevent the pump and drive motor from reversing, and the discharge of the container medium. The check valve can also be used to supply the auxiliary system whose pressure may rise above the system pressure. Check valves can be divided into swing check valves (rotating according to the center of gravity) and lift check valves (moving along the axis).

Valve manufacturers recommend:
Tanghai Valve Factory is a technological enterprise that produces globe valves and check valves. It designs and produces according to your needs, and provides you with professional, high-quality, low-priced valve products. Welcome to call us for quotations.