China Archives

Strainer valve introduction and its features

August 17, 2020

STRAINER VALVE, also known as filter: a device for filtering pretreatment. The filter valve is the filter equipment necessary for the use of hydraulic control valves and precise and easy-to-clog mechanical products.

Strainer valve Introduction:
STRAINER VALVE, also known as filter: a device for filtering pretreatment. The filter valve is the filter equipment necessary for the use of hydraulic control valves and precise and easy-to-clog

15 Y-type-strainer-filter-valve-7

Y type strainer filter valve (11)

mechanical products. It is an indispensable device in the pipeline series that transports the medium. It is usually installed at the inlet of hydraulic control valves, pressure relief valves, pressure relief valves, fixed water level valves and other equipment to eliminate impurities in the medium and prevent particulate impurities from entering The channel causes wall plugs to protect the fittings on the equipment pipeline from wear and blockage. When cleaning is needed, just take out the detachable filter cartridge and reinstall it after treatment. Therefore, the use and maintenance are extremely convenient.

Features of filter valve:
The filter valve mesh adopts a stainless steel double-layer mesh structure, which is sturdy and durable. It has the characteristics of advanced structure, low flow resistance, and convenient sewage discharge. It can be used for water, steam, oil, nitric acid, urea, oxidizing media and other media. The mesh number of the filter screen should be set according to the user’s needs. Generally, the water network is 18-30 mesh, the ventilation network is 40-100 mesh, and the oil network is 100-480 mesh. The Y-type filter can also be combined with the telescopic joint to form a Y-type pull rod telescopic filter with adjustable installation length. The filter screen can be made according to user requirements.

Filter valve performance parameters:
Connection method: flange, butt welding, thread
Nominal pressure/MPa: 1.0-2.5
Pressure test pressure/MPa: 1.1-2.75
Working pressure/MPa 1.0 -2.5
Shell material: gray cast iron. ductile iron. carbon steel. stainless steel
Filter material: stainless steel
Total mesh area: 3～4DN

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Daily maintenance and precautions of ball valves

August 14, 2020

Daily maintenance of ball valve:
Long service life and maintenance-free period will depend on the following factors: normal working conditions, maintaining a harmonious temperature/pressure ratio, and reasonable corrosion data.

14 ball-valve-6

When the ball valve is closed, there is still pressurized fluid inside the valve body.

Before maintenance: relieve the pipeline pressure and leave the valve in the open position; disconnect the power or air source; separate the actuator from the bracket.

It is necessary to find out that the upstream and downstream pipelines of the ball valve have indeed been relieved of pressure before disassembling.

Care must be taken to prevent damage to the sealing surface of parts, especially non-metal parts, when disassembling and reassembling. Special tools should be used when removing O-rings.

The bolts on the flange must be tightened symmetrically, gradually and evenly during assembly.

The cleaning agent should be compatible with the rubber parts, plastic parts, metal parts and working medium (such as gas) in the ball valve. When the working medium is gas, gasoline (GB484-89) can be used to clean metal parts. Clean non-metal parts with pure water or alcohol.

Non-metal parts should be taken out of the cleaning agent immediately after cleaning, and should not be soaked for a long time.

After cleaning, it needs to be assembled after the cleaning agent of the wall surface to be washed evaporates (can be wiped with silk cloth not soaked in cleaning agent), but it should not be left for a long time, otherwise it will rust and be contaminated by dust.

New parts also need to be cleaned before assembly.

When assembling, it should not be allowed to have metal chips, fibers, grease (except those specified for use), dust, other impurities, foreign objects, etc., to contaminate, adhere or stay on the surface of the parts or enter the cavity. Then tighten the stem nut.

Note: Don’t lock it too tightly, usually lock 1/4 turn to 1 turn, the leakage will stop.

A), disassembly

Keep the valve in a half-open position to flush and remove dangerous substances that may exist inside and outside the valve.

Close the ball valve, remove the connecting bolts and nuts on both flanges, and then completely remove the valve from the pipeline.

Disassemble the drive device-actuator, connecting bracket, lock washer, stem nut, butterfly shrapnel, glam, wear-resistant piece, stem packing in order.

Remove the body cover connecting bolts and nuts, separate the valve cover from the valve body, and remove the valve cover gasket.

Make sure that the valve ball is in the “off” position. This will make it easier to take it out of the valve body, and then take out the valve seat.

Gently push the stem down from the hole in the valve body until it is completely taken out, and then take out the O-ring and the lower packing of the stem.

Note: Please operate carefully to avoid scratching the surface of the valve stem and the sealing part of the valve body stuffing box.

B), reassembly

Clean and inspect the removed parts. It is strongly recommended to replace the valve seat and valve cover gasket with spare parts kit.

Assemble in the reverse order of disassembly.

Use the specified torque to tighten the flange connecting bolts crosswise.

Tighten the stem nut with the specified torque.

After installing the actuator, input the corresponding signal to drive the valve core to rotate by rotating the valve stem to make the valve open and close.

If possible, please perform pressure seal test and performance test on the valve according to relevant standards before reinstalling the pipeline.

Applicable occasions and operation method of ball valve

August 14, 2020

Applicable occasions of ball valve:
Since the ball valve usually uses rubber, nylon and polytetrafluoroethylene as the seat sealing ring material, its use temperature is limited by the seat sealing ring material. The cut-off effect of the ball valve is accomplished by

14 ball-valve-6

pressing the metal ball against each other between the plastic valve seats under the action of the medium (floating ball valve). Under the action of certain contact pressure, the seat sealing ring has elastic-plastic deformation in some areas. This deformation can compensate the manufacturing accuracy and surface roughness of the ball, and ensure the sealing performance of the ball valve.

In addition, since the seat sealing ring of the ball valve is usually made of plastic, when selecting the structure and performance of the ball valve, the fire resistance and fire resistance of the ball valve must be considered, especially in the petroleum, chemical, metallurgical and other sectors, in the flammable and explosive media Ball valves are used in the equipment and piping systems, and more attention should be paid to fire and fire resistance.

Generally, in two-position adjustment, strict sealing performance, mud, wear, necking channel, rapid opening and closing action (1/4 turn opening and closing), high pressure cut-off (large pressure difference), low noise, cavitation and vaporization, In piping systems with a small amount of leakage to the atmosphere, small operating torque and low fluid resistance, ball valves are recommended.

Ball valves are also suitable for piping systems with light structure, low pressure cut-off (small pressure difference), and corrosive media. Ball valves can also be used in cryogenic (cryogenic) devices and pipeline systems. In the oxygen pipeline system of the metallurgical industry, ball valves that have undergone strict degreasing treatment are required. When the main line in the oil pipeline and gas pipeline needs to be buried underground, full-diameter welded ball valves are required. When the adjustment performance is required, a ball valve with a special structure with a V-shaped opening should be selected. In petroleum, petrochemical, chemical, electric power, and urban construction, metal-to-metal sealed ball valves can be used for pipeline systems with operating temperatures above 200 degrees.

Operation method of ball valve:
1) Before operation, make sure that the pipeline and valve have been flushed.

2) The operation of the valve drives the valve stem to complete rotation according to the size of the input signal of the actuator: when it rotates 1/4 turn (90°) in the forward direction, the valve is closed. When reverse rotation is 1/4 turn (90°), the valve opens.

3) When the actuator direction indicator arrow is parallel to the pipeline, the valve is open; when the indicator arrow is perpendicular to the pipeline, the valve is closed.

Hard seal installation method of ball valve

August 14, 2020

Hard seal installation method of ball valve:

1) Remove the protective covers on both sides of the flange, and rinse and clean with the valve fully opened.

ball valve (6)

2) Before installation, the whole machine should be tested according to the specified signal (electrical or pneumatic) (to prevent vibration caused by transportation from affecting the performance), and then it can be installed online (wiring according to the electric actuator circuit diagram).
3) Before preparing to connect with the pipeline, flush and remove the remaining impurities in the pipeline (these substances may damage the valve seat and ball).
4) During installation, please do not use the actuator part of the valve as a lifting point to avoid damage to the actuator and accessories.
5) This type of valve should be installed in the horizontal or vertical direction of the pipeline.
6) The pipeline near the installation point should not be drooping or bear external force. Pipe supports or supports can be used to eliminate pipeline deviation.
7) After connecting with the pipeline, please cross-tighten the flange connecting bolts with the specified torque.

Tianjin Tanghai Valve Manufacturing Co., Ltd. is one of the largest ball valve manufacturers in China, main products are butterfly valves, check valves, gate valve and globe valves. Key words: butterfly valve, lug type butterfly valve, wafer type butterfly valve, U-type butterfly valve, double flange butterfly valve, gate valves, check valves, globe valves, valve parts (Valve body, Valve disc, Valve shaft, Valve seat…)

Installation instructions for ball valves

August 14, 2020

Installation instructions for ball valves:

1. Indoor devices or outdoor applications with protective methods;

ball valve (7)

2. Outdoor installations are corroded by wind, sand, rain, dew, and sunlight;
3. Have flammable, explosive gas or dust environment;
4. Humid tropical and dry tropical environment;
5. The temperature of the pipeline medium is as high as 450℃;
6. The ambient temperature is lower than -20℃;
7. Easy to be flooded or immersed in water;
8. Possess a radioactive material (nuclear power plant and radioactive material test device) environment;
9.The environment on the ship or dock (with salt spray, mold, humidity);
10.Occasions with severe vibration; occasions prone to fire;

For the electric ball valve in the above environment, the electric device structure, material and protection method are different. Therefore, the corresponding valve electric device should be selected according to the above-mentioned obligation environment. According to engineering control requirements, for electric ball valves, their control functions are completed by electric devices. The purpose of applying electric ball valves is to complete non-manual electrical control or computer control of valve opening, closing and adjustment linkage. The application of electric devices is not just for diligence and labor saving. Since the functions and quality of products from different manufacturers are quite different, the selection of electric devices and the selection of valves are equally important to the project. As the requirements of industrial automation level are constantly improving, on the one hand, the application of electric valves is increasing, and on the other hand, the control requirements for electric valves are getting higher and higher and more complicated. Therefore, the design of electric valves in electrical control is always updated. With the continuous improvement of use requirements and the popularization and application of computers, new and diverse electrical control methods will always appear. Regarding the overall control of the electric valve, attention should be paid to the selection of the control method of the electric valve. For example, depending on the needs of the project, whether to use a centralized control method or a single control method, whether to link with other equipment, sequence control or application computer sequence control, etc., the control principles are different. The sample of valve electric device manufacturers only gives standard electric control principles, so the application department should make technical clarifications with the electric device consumer to understand the technical requirements.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

The parameter and troubleshooting of the ball valve

August 14, 2020

The parameter level of the ball valve:

1. Nominal pressure or pressure level: PN1.0-32.0MPa, ANSI CLASS 150-900, JIS10-20K;

14 ball-valve-6

2. Nominal diameter or caliber: DN6～900, NPS 1/4 ～36;

3. Connection method: flange, butt welding, thread, socket welding, etc.;

4. Applicable temperature: -196℃～540℃;

5. Drive mode: manual, worm gear drive, pneumatic, electric, hydraulic, gas-liquid linkage, electro-hydraulic linkage;

6. Valve body material: WCB, ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti, CF8 (304), CF3 (304L), CF8M (316), CF3M (316L), Ti. Different materials are used, which can be applied to various media such as water, steam, oil, nitric acid, acetic acid, oxidizing medium, urea, etc.

Pressure limit of ball valve:
The nameplate shows the maximum allowable operating pressure of the ball valve at the maximum and minimum operating temperatures.

Seats and seals made of PTFE or RTFE are used. The operating temperature of other types of seat and seals should be checked by the KI factory.

The nominal pressure rating (PN) of the valve can indicate the maximum working pressure of the valve under normal temperature conditions. (For example: PN4.0, indicating that the maximum working pressure is 40 Bar (4.0MPa) when the operating temperature is between -190C and 380C).

For the precautions of electric or pneumatic actuators, refer to their corresponding instructions.

Troubleshooting of the ball valve:
The ball valve has been scoured by the material for a long time, causing friction, causing severe impact and abrasion, which cannot meet the normal production, and at the same time, the equipment life is shortened. At present, wear-resistant materials, such as ceramic materials and polymer composite materials, are mostly used for the wear of ball valves, and there are more technical systems used. The polymer material has superior adhesion performance, super wear resistance, and safely solves the disadvantages of frequent metal wear and ensures the normal production of enterprise equipment. Moreover, the unique ceramic material and special surface strengthening agent in the material make it better than any steel or even ceramic tile in wear resistance and physical impact resistance in the harshest dry grinding environment. The incompatibility of the product with coal is to prevent Ideal material for coal deposits.

Product features and advantages of ball valve

August 14, 2020

Product features of ball valve:
1. The three-way ball valve adopts an integrated structure in structure, with a four-sided valve seat sealing type, fewer flange connections, high reliability, and a lightweight design.

ball valve (8)

2. The three-way ball core is divided into T type and L type, with long service life, large circulation capacity and low resistance.

3. The ball valve is divided into two types: single-acting and double-acting according to the action type. The single-acting type is characterized in that once the power source fails, the ball valve will be in the state required by the control system.

Advantages of ball valve:

1. The fluid resistance is small, and its resistance coefficient is equal to that of a pipe section of the same length.

2. Simple structure, small size and light weight.

3. It is tight and reliable, and the sealing surface material of the ball valve is widely used in plastics and has good sealing performance. It has also been widely used in vacuum systems.

4. It is easy to operate and open and close quickly. It only needs to rotate 90° from fully open to fully closed, which is convenient for remote control.

5. The maintenance is convenient, the structure of the ball valve is simple, the sealing ring is generally movable, and it is convenient to disassemble and replace.

6. It has a wide range of applications, with a diameter ranging from a few millimeters to a few meters, and can be applied in high vacuum or high pressure.

This type of valve is a high-pressure ball valve commonly used in existing mines. It bears high pressure and adopts a U-shaped card quick connection method. It can be quickly installed and disassembled in the daily production and use of the mine, and is convenient to use.

The ash unloading ball valve is mainly used to cut off, distribute and change the flow direction of the medium in the pipeline. The ash unloading ball valve can be divided into floating ball type, fixed ball type, and elastic ball type. The ash unloading ball valve is mainly used to cut off or connect the medium in the pipeline. It can also be used for fluid adjustment and control. The ash unloading ball valve Compared with other valve types, it has angular stroke output torque, opens quickly, is stable and reliable, and is widely applicable. The working principle of the ash unloading ball valve is to make the valve unblocked or blocked by rotating the valve.

Electric ball valve structure is composed of only a few parts, saving data; small size, light weight, small installation size, electric ball valve structure diagram, small driving torque, pressure regulating valve, easy and agile operation, only need to rotate 90° Fast opening and closing; and also has a good flow regulation effect and sealing characteristics at the same time, in the application of large and medium caliber, medium and low pressure, electric ball valve is the dominant valve form. When the electric ball valve is in the fully open position, the thickness of the butterfly plate is the resistance when the medium flows through the valve body, so the pressure drop that occurs through the valve is small, so it has better flow control characteristics. Electric ball valves have two sealing types: elastic seal and metal seal. Elastic sealing valve, the sealing ring can be embedded in the valve body or attached to the periphery of the butterfly plate. Valves with metal seals generally have a longer life than valves with elastic seals, but it is difficult to achieve a complete seal. Metal seals can adapt to higher operating temperatures, while elastic seals have the disadvantage of being limited by temperature. If the electric ball valve is requested to be used as a flow control, it is important to accurately select the size and type of the valve. The construction principle of the electric ball valve is particularly suitable for manufacturing large diameter valves. Electric ball valves are not only widely used in general industries such as petroleum, gas, chemical, and water disposal, but also used in cooling water systems of thermal power stations. Commonly used electric ball valves include wafer type electric ball valves and flange type electric ball valves. Wafer type electric ball valve uses double-head bolts to connect the valve between two pipe flanges. Flange type electric ball valve is equipped with flanges on the valve. The two flanges on the valve are connected to the pipe flanges with bolts. The strength performance of the valve refers to the ability of the valve to withstand medium pressure. The valve is a mechanical product that is subjected to internal pressure, so it must have sufficient strength and rigidity to ensure long-term use without cracking or deformation. Pneumatic ball valve is composed of ball valve and pneumatic actuator. Pneumatic actuator is divided into double-acting pneumatic actuator and single-acting pneumatic actuator. Through solenoid valve control, ball valve switching action is realized. The pneumatic ball valve can realize intelligent control, quickly open or close the pipeline, and can effectively control and manage the pipe network.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Characteristics of ball valve

August 14, 2020

Features of ball valve:
1. Wear resistance; because the valve core of the hard-sealed ball valve is spray-welded alloy steel,

ball valve (2)

The sealing ring is made of alloy steel surfacing, so the hard sealing ball valve will not produce too much wear when opening and closing. (Its hardness coefficient is 65-70):

Second, the sealing performance is good; because the sealing of the hard-seal ball valve is manually ground, it can be used until the valve core and the sealing ring are completely matched. So his sealing performance is reliable.

3. The switch is light; since the bottom of the sealing ring of the hard-sealed ball valve adopts a spring to make the sealing ring and the valve core tightly hug together, the switch is very light when the external force exceeds the preload of the spring.

4. Long service life: It has been widely used in petroleum, chemical industry, power generation, papermaking, atomic energy, aviation, rockets and other departments, as well as people’s daily life.

The pneumatic ball valve has a simple and compact structure, reliable sealing, and convenient maintenance. The sealing surface and the spherical surface are always in a closed state, which is not easy to be eroded by the medium. It is easy to operate and maintain. It is suitable for general working media such as water, solvent, acid and natural gas. It is mainly used for cutting off. Or connect the medium in the pipeline, and can also be used for fluid adjustment and control.

Compared with other types of valves, pneumatic ball valves have angular stroke output torque, quick opening, stable and reliable, wide application, and the following advantages:

1. The thrust bearing reduces the friction torque of the valve stem, which can make the valve stem operate smoothly and flexibly for a long time.

2. Anti-static function: a spring is set between the ball, valve stem and valve body, which can lead out the static electricity generated during the switching process.

3. Since materials such as polytetrafluoroethylene have good self-lubricating properties and small friction loss with the ball, the pneumatic ball valve has a long service life.

4. Small fluid resistance: Pneumatic ball valves have the smallest fluid resistance among all valve categories. Even the reduced diameter pneumatic ball valves have relatively small fluid resistance.

5. Reliable valve stem sealing: Since the valve stem only rotates and does not move up and down, the packing seal of the valve stem is not easy to be damaged, and the sealing ability increases with the increase of the medium pressure.

6. Good sealing performance of the valve seat: The sealing ring made of elastic materials such as polytetrafluoroethylene is easy to seal in structure, and the valve sealing capacity of the pneumatic ball valve increases with the increase of the medium pressure.

7. The fluid resistance is small, and the full-bore ball valve basically has no flow resistance.

8. Simple structure, small size and light weight.

9. Close and reliable. It has two sealing surfaces, and the sealing surface materials of the ball valve are widely used in various plastics, which have good sealing performance and can achieve complete sealing. It has also been widely used in vacuum systems.

10. Convenient operation, rapid opening and closing, only need to rotate 90° from fully open to fully closed, which is convenient for remote control.

11. Convenient maintenance, simple structure of the ball valve, generally movable sealing ring, easy to disassemble and replace.

12. When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium. When the medium passes, it will not cause erosion of the valve sealing surface.

13. It has a wide range of applications, with a diameter ranging from a few millimeters to a few meters, and can be applied from high vacuum to high pressure.

14. Because the ball valve has wiping properties during opening and closing, it can be used in media with suspended solid particles.

15. The processing precision is high, the cost is expensive, and it is not suitable for use in high temperature. If there are impurities in the pipeline, it is easy to be blocked by the impurities, causing the valve to fail to open.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

What is a ball valve?

August 14, 2020

A ball valve is a valve in which the opening and closing parts (ball) are driven by the valve stem and rotate around the axis of the ball valve. It can also be used for fluid adjustment and control.

14 ball-valve-6

Ball valves are divided into pneumatic ball valves, electric ball valves, and manual ball valves according to the driving mode. In China, ball valves are widely used in petroleum refining, long-distance pipelines, chemicals, papermaking, pharmaceuticals, water conservancy, electric power, municipal administration, steel and other industries.

Product description of ball valve:
Ball valve came out in the 1950s. With the rapid development of science and technology, the continuous improvement of production technology and product structure, in just 40 years, it has rapidly developed into a major valve category. In developed western countries, the use of ball valves is increasing year by year.

In my country, ball valves are widely used in petroleum refining, long-distance pipelines, chemicals, papermaking, pharmaceuticals, water conservancy, electric power, municipal administration, steel and other industries, and occupy a pivotal position in the national economy. It has the action of rotating 90 degrees, and the cock body is a sphere with a circular through hole or channel passing through its axis.

The ball valve is mainly used to cut off, distribute and change the flow direction of the medium in the pipeline. It only needs to rotate 90 degrees and a small torque to close tightly. The ball valve is most suitable for use as a switch and shut-off valve, V-shaped ball valve. In addition to paying attention to pipeline parameters, electric valves should also pay special attention to the environmental conditions in which they are used. Since the electric device in the electric valve is an electromechanical device, its use status is greatly affected by its use environment. Under normal conditions, special attention should be paid to the use of electric ball valves and butterfly valves in the following environments.

Tianjin Tanghai Valve Manufacturing Co., Ltd. is one of the largest ball valve manufacturers in China, main products are butterfly valves, check valves, gate valve and globe valves. Key words: butterfly valve, lug type butterfly valve, wafer type butterfly valve, U-type butterfly valve, double flange butterfly valve, gate valves, check valves, globe valves, valve parts (Valve body, Valve disc, Valve shaft, Valve seat…)

Knife gate valve introduction and its characteristics

August 14, 2020

Knife gate valve entered China in the 1980s. In less than two decades, its use has expanded from ordinary fields to a

Knife gate valve (1)

wider range of industries, from coal preparation, gangue discharge, and slag discharge in mines and power plants to Urban sewage treatment has evolved from general industrial pipelines to specialized pipeline systems for food, sanitation, and medicine.

What is a knife gate valve:
Knife gate valve-also known as knife door valve, knife-type slurry valve, entered my country in the 1980s. In less than two decades, its scope of use has expanded from the general field to a wider range of industries. Coal preparation, gangue discharge and slag discharge from mines and power plants. It has developed into urban sewage treatment, from general industrial pipelines to professional pipeline systems such as food, sanitation, and medicine. The ultra-thin knife gate valve completely solves the large flow resistance of ordinary gate valves, flat gate valves, ball valves, globe valves, regulating valves, butterfly valves and other valves with its advantages of small size, small flow resistance, light weight, easy installation, and easy disassembly. , Heavy weight, difficult installation, large area and other difficult problems. After the emergence of knife gate valves, a large number of general shut-off valves and regulating valves have been replaced. To date, the world’s largest consumption of knife gate valves is the United States and Japan.

Characteristics of knife gate valve:

Knife gate valve-

1. Valve control can be used for local and remote control, and can also realize remote position display and remote centralized control according to user requirements.

2. Light weight: The body is made of carbon steel, and the weight is about 20%-30% lighter than the traditional gate valve. It is easy to install and maintain.

3. The use of this valve can improve the closing and sealing performance of the conveying pipeline system, prevent leakage to the maximum extent, and play a positive role in improving production efficiency and protecting the environment.

4. The sealing surface is made of highly wear-resistant and corrosion-resistant ceramic materials, and the use of inlay technology has high corrosion resistance and good wear resistance, so that the valve has a long life and the cost performance is 10 times higher than that of ordinary valves.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Posts

Strainer valve introduction and its features

Daily maintenance and precautions of ball valves

Applicable occasions and operation method of ball valve

Hard seal installation method of ball valve

Installation instructions for ball valves

The parameter and troubleshooting of the ball valve

Product features and advantages of ball valve

Characteristics of ball valve

What is a ball valve?

Knife gate valve introduction and its characteristics

TH VALVE • PROFESSIONAL VALVE MANUFACTURER

GET IN TOUCH WITH US