News & Events

Detailed introduction of soft sealing butterfly valve-(1)

The butterfly plate of the soft sealing butterfly valve is installed in the diameter direction of the pipeline. In the cylindrical passage of the butterfly valve body, the

ductile iron, DI, butterfly valve, manufacturer, center line, TH valve

ductile iron, DI, butterfly valve, manufacturer, center line, TH valve

disc-shaped butterfly plate rotates around the axis, and the rotation angle is between 0° and 90°. When the rotation reaches 90°, the valve is fully opened. The characteristics of the new type of high-life stainless steel butterfly valve and the problem of the butterfly valve during use, this type of valve should generally be installed horizontally in the pipeline.

Problems in use of soft sealing butterfly valve:
1. Since the multi-layer soft and hard stacked sealing ring is fixed on the valve plate, when the valve plate is normally open, the medium will wash its sealing surface positively, and the soft sealing tape in the metal sheet sandwich will directly affect the sealing performance after being washed.

2. Due to structural conditions, this structure is not suitable for valves with a diameter below DN200, because the overall structure of the valve plate is too thick and the flow resistance is large.

3. Due to the principle of the triple eccentric structure, the seal between the sealing surface of the valve plate and the valve seat depends on the torque of the transmission device to press the valve plate against the valve seat. In the state of positive flow, the higher the medium pressure, the tighter the sealing extrusion. When the flow channel medium flows back, as the medium pressure increases, the unit positive pressure between the valve plate and the valve seat is less than the medium pressure, the seal begins to leak.

high-performance soft sealing butterfly valve, characterized in that: the valve seat sealing ring is composed of multiple layers of stainless steel sheets on both sides of the soft T-shaped sealing ring.

The sealing surface of the valve plate and the valve seat is of oblique cone structure, and the temperature and corrosion resistant alloy material is built up on the oblique cone surface of the valve plate; the spring fixed between the pressure plate of the adjusting ring and the adjusting bolt of the pressure plate are assembled together. This structure effectively compensates for the tolerance zone between the shaft sleeve and the valve body and the elastic deformation of the valve stem under the medium pressure, and solves the sealing problem of the valve in the two-way interchangeable medium conveying process.

The sealing ring is composed of a soft T-shaped multi-layer stainless steel sheet on both sides, which has the dual advantages of metal hard and soft sealing. It has zero leakage sealing performance regardless of low temperature and high temperature. The test proves that in the positive flow state of the pool (the flow direction of the medium is the same as the rotation direction of the butterfly plate), the pressure of the sealing surface is produced by the torque of the transmission device and the action of the medium pressure on the valve plate. When the positive medium pressure increases, the tighter the oblique cone surface of the valve plate and the sealing surface of the valve seat are pressed, the better the sealing effect.

In the reverse flow state, the seal between the valve plate and the valve seat is pressed against the valve seat by the torque of the driving device. With the increase of the reverse medium pressure, when the unit positive pressure between the valve plate and the valve seat is less than the medium pressure, the deformation energy stored by the spring of the adjusting ring after being loaded compensates for the tight pressure of the sealing surface of the valve plate and the valve seat Play the role of automatic compensation.

Therefore, unlike the prior art, the utility model does not install a soft and hard multilayer sealing ring on the valve plate, but directly installs it on the valve body. Adding an adjustment ring between the pressure plate and the valve seat is a very ideal two-way hard sealing method. . It can replace gate valves and globe valves

Related news /knowledge:
Detailed introduction of soft sealing butterfly valve-(3);
How to choose the right butterfly valve (2);
Difference between Soft seal gate valve and hard seal gate valve;
Difference between soft seal butterfly valve and hard seal butterfly valve;