wafer type Archives

wafer type single plate swing check valve manufacturer

April 15, 2022

Our company specializes in the production of wafer type single plate check valve, stainless steel single disc check valve, aluminum bronze single plate check valve, etc. The price is favorable and the quality is stable. Specializing in the production of valves for 16 years.

wafer type, single disc swing check valve (3)

Single-plate check valve is an ultra-thin check valve with short structure size and single disc design. Compared with the traditional swing check valve, this series of valves has no external leakage, can be installed at any position, Good sealing performance, low linear vibration, low pressure drop and zero seat ring wear advantages.
Product name: Single plate check valve
Product model: H74H, H74W, H74X
Nominal diameter: DN50～DN1000
Structural form: single flap swing
Nominal pressure: 1.6MPa～4.0MPa
Connection method: Wafer type
Applicable temperature: -29ºC～+425ºC
Drive Mode: Media Push
Body material: cast steel, stainless steel, aluminium bronze, …
Standard: National standard GB, German DIN, American API, ANSI
Applicable medium: water, oil, steam, gas, liquid
Manufacturer: Tanghai valve

ALB Single plate check valve

Product description of single plate check valve:
H74H, H74W, H74X single-plate check valve is an ultra-thin check valve with short structure size and single disc design. Compared with the traditional swing check valve, this series of valves has no external leakage, Can be installed in any position, good sealing performance, low linear vibration, low pressure drop and zero seat ring wear advantages.
The working principle of single plate check valve:
The single-plate check valve is a disc type ultra-thin check valve. The disc is attached with an O-ring seal, which has good sealing performance, and is assisted by a spring to close, and the action is sensitive. It is especially suitable for places with limited installation space. It has the advantages of simple structure, beautiful appearance, light weight and convenient installation. It is mainly suitable for water supply system, petroleum, chemical industry, metallurgy and other industrial sectors. It is most suitable for places with limited installation space.
Product features of single plate check valve:
1. The structure is very short in length, small in size and light in weight, which brings great convenience to the installation, handling and storage of pipes for the valve, and can save a lot of materials and reduce costs.
2. The valve is an integral structure, simple and compact, the impact force is small when the valve is closed, the water hammer pressure is small, the valve life is long, and the reliability is high.
3. It can be installed horizontally or vertically, and it is light in weight, and it is not necessary to set a support for the valve.
4. The flow channel is smooth, the fluid resistance is small, and the valve disc can be fully opened under a small pressure difference.
Performance parameters of single plate check valve:

Code	Pressure（MPa）	Temp（℃）	Medium	Body material
H74X-10C/16C/25C	1.0～2.5	－29～80	Water, Oil	CS /SS /ALB
H74H-10C/16C/25C/40C	1.0～4.0	－29～425	Water, Oil, Gas	CS /SS /ALB
H74W-10P/16P/25P/40P	1.0～2.5	≤150	Nitric acid	SS
H74Y-40P	4.0	≤150	Nitric acid	SS

Outline structure diagram and main dimensions:

video of wafer type single disc swing check valve:

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Commonly used valve body materials of centerline wafer butterfly valve

December 21, 2021

The centerline butterfly valve can be controlled by a variety of transmission methods, such as manual, electric, hydraulic, pneumatic, turbine, electromagnetic, electromagnetic hydraulic, electro-hydraulic, pneumatic-hydraulic, spur gear, bevel gear drive, etc. Under the action of pressure, temperature or other forms of sensing signals, it can act according to predetermined requirements, or simply open or close without relying on sensing signals. The valve

Wafer type butterfly valve with worm gear

relies on a drive or an automatic mechanism to make the opening and closing parts move up and down, sliding, swinging or rotating, thereby changing the size of the flow channel to achieve its control function. The centerline wafer butterfly valve is very suitable for the flow adjustment of the fluid, and it is also used as the opening and closing of the medium. It is a very common pipe fitting in the industrial field. Different valve body materials will be suitable for different centerline butterfly valve classifications.

The body materials of the centerline wafer butterfly valve mainly include:
Gray cast iron: suitable for low-pressure valves with a working temperature between -15 and +200°C and a nominal pressure of PN ≤ 1.6 MPa;
Black core malleable cast iron: suitable for low- and medium-pressure valves with a working temperature between -15 and +250°C and a nominal pressure of PN≤2.5MPa;
Nodular cast iron: suitable for medium and low pressure valves with a working temperature between -30 and +350°C and a nominal pressure of PN≤4.0MPa;
Carbon steel (WCA, WCB, WCC): suitable for medium and high pressure valves with operating temperature between -29 and +425°C, of which 16Mn and 30Mn have operating temperatures between -40 and +450°C, often used to replace ASTMA105 ；
Low-temperature carbon steel (LCB): suitable for low-temperature valves and valves whose working temperature is between -46~+345℃;
Alloy steel (WC6, WC9): suitable for high temperature and high pressure valves for non-corrosive media with a working temperature between -29 and +595°C; WC5, WC12: suitable for corrosion at a working temperature between -29 and +650°C High temperature and high pressure valves for sexual media;
Austenitic stainless steel: suitable for valves with corrosive media whose working temperature is between -196~+600℃;
Monel alloy: mainly suitable for valves containing hydrogen and fluorine media;
Cast copper alloy: Mainly suitable for valves for oxygen pipelines whose operating temperature is between -273 and +200℃;

Listed above are the major categories of commonly used materials for valve bodies. In each category of material, there are many functional subdivisions for different pressure levels. In addition, the valve body materials include titanium alloy (titanium valve), aluminum alloy (aluminum valve); plastic (plastic valve); ceramic (ceramic valve) and so on. Therefore, when selecting the valve body material, the valve body material suitable for the working conditions should be determined according to different uses and different pressure levels.
The centerline wafer butterfly valve is a control component in the pipeline fluid conveying system. It is used to adjust the flow direction and flow of the medium, and has the functions of opening and closing and medium adjustment. There are many varieties and specifications, which are used to control the flow of various types of fluids such as water, steam, oil, gas, mud, various corrosive media, liquid metals and radioactive fluids, and occupy an important position in the entire valve system.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Video of center-lined butterfly valve:

Field Application of Electric resilient seated Wafer Butterfly Valve

November 22, 2021

The electric resilient seated butterfly valve is actually a kind of electric control valve system. It is a high-performance valve upgraded from the ordinary butterfly valve category. It also uses electrical operation during operation. Therefore, the most obvious advantage of the electric resilient seated butterfly valve is that it is quite simple and easy to control.

triple eccentric butterfly valve-wafer-lug-double flange-welded (5)

In today’s society, various electrified operating systems have replaced old equipment, electrification and intelligence are no longer unfamiliar words to us. To keep up with the rapid development of the valve industry, constant humane upgrades are essential. In the past, companies had to set up manpower specifically for valve operation and management, but now the birth of electric resilient seated butterfly valves allows companies to no longer consume this cost. It has unique structure, flexible operation, labor saving and convenient. If the sealing material is matched with stainless steel and nitrile oil-resistant rubber, the service life can be effectively extended.
In terms of composition, the electric resilient seated wafer butterfly valve is composed of wafer butterfly valve and small electric actuator. Its structure is compact, and it is easy to switch by 90°. Its valve body material is usually cast iron, ductile iron, stainless steel, copper alloy, aluminum alloy. Disc materials are usually: ductile iron, stainless steel, corrosion-resistant steel, titanium steel, copper alloy. The valve seat material is usually nitrile nitrile, ethylene propylene, neoprene, Hypolon, polytetrafluoroethylene, natural rubber, etc. The choice of material makes the valve more sealed and reliable, and it is widely used in water supply and drainage systems such as water plants, power plants, steel plants, papermaking, chemical industries, and catering, as adjustment and cut-off use. While saving manpower, it greatly reduces the damage to working conditions and personnel. For example, in some special toxic or polluting working conditions, the electric resilient seated wafer butterfly valve does not require long-term contact by personnel, but only a light switch. , So the humanized management is a great improvement.
The reason why the electric resilient seated wafer butterfly valve can have such a good development in modern times is due to the increase of valve export products, so the market also puts forward higher requirements for valve standards. Valve quality and sales channels have become key competitive factors. Therefore, while competing for channels, manufacturers pay more attention to product technology research and development, quality, packaging, and delivery period will have higher requirements. In the future, the production process and R&D process of electric resilient seated wafer butterfly valve products will be more closely integrated with environmental protection and energy.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Wafer type dual plate check valve: metal seated vs resilient seated

October 12, 2021

Wafer dual plate check valve is used for pure pipelines and industrial, environmental protection, water treatment, high-rise building water supply and drainage pipelines, to prevent the reverse flow of the medium. The check valve adopts a clamp type, the butterfly plate is two semicircles, and it adopts a spring for forced reset. The sealing surface can be built-up welding wear-resistant material or rubber lining, with a wide range of use and reliable sealing.

The check valve opening and closing parts are opened or closed automatically by the flow and force of the medium to prevent the medium from flowing back. The valve is called the check valve. Check valves belong to the category of automatic valves, which are mainly used in pipelines where the medium flows in one direction, and only allow the medium to flow in one direction to prevent accidents.

According to the structure of the check valve, it can be divided into three types: lift check valve, swing check valve and butterfly check valve. Lift check valves can be divided into two types: vertical and horizontal. Swing check valves are divided into three types: single valve, double valve and multi valve. The butterfly check valve is a straight-through type. The above-mentioned check valves can be divided into three types in connection form: threaded connection, flange connection and welding. A check valve is a valve that can automatically prevent fluid from flowing back. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the pressure on the inlet side is lower than that on the outlet side, the valve flap is

H46-double flanged dual plate check valve-metal seated

automatically closed under the action of the fluid pressure difference, its own

lug type dual plate check valve metal seated (3)

gravity and other factors to prevent the fluid from flowing back.

klug type dual plate check valve metal seated (1)The dual plate check valve is divided into flange dual plate check valve, lug dual plate check valve and wafer dual

plate check valve.

Classification of wafer dual plate check valves: hard-seal wafer dual plate check valve and soft-seal wafer dual plate check valve; of which soft-seal wafer check valve is divided into full-lined soft-seal wafer check valve and Semi-lined/normal soft-seal wafer dual plate check valve.

Features of Wafer dual plate Check Valve:

Simple structure and light weight, especially suitable for low-pressure large-diameter pipelines;
The paired clamp connection mode, the production process is simple, and the disassembly and assembly are convenient;
The check valve adopts the clamp type, the butterfly plate is two semicircles, and the spring is forced to reset. The sealing surface can be built-up welding wear-resistant material or rubber lining, with a wide range of use and reliable sealing.

Model: H76X/H76H/H76W
Name: Wafer dual plate check valve
Please refer to the main technical parameters and spare parts materials:
https://www.tanghaivalve.com/wafer-type-double-disc-swing-check-valve-introduction/
Product name: Wafer double plate check valve (soft seal)
National Standard Number: H76X

dual plates check valve photos-normal sealing (1)

Size range: DN40-DN1200
Pressure rating: PN10/16/25/40/64/100
Valve features: double valve plate design, short running track of the valve plate, spring load makes the valve plate close more quickly, effectively preventing water hammer
When the valve plate is opened, it is close to 90 degrees, and the pressure loss is small
Zero leakage
Size range: 2″ to 48″
Pressure range: 10bar-50 bar
Suitable flange: National standard or EN1092 PN10/PN16/PN25/PN40 or ANSI 125/150/300
Structure length: EN558 series 16, API594

Body material: gray cast iron, ductile iron, carbon steel, stainless steel, aluminum bronze
Valve plate material: ductile iron nickel-plated, stainless steel 201, stainless steel 304,

dual plates check valve photos- full rubber

stainless steel 316, aluminum bronze
Valve seat material: nitrile NBR, EPDM, oil and acid and alkali resistant fluorine rubber VITON-A, steam resistant fluorine rubber VITON-B, hard seal
Uses: Suitable for installation at the outlet of high-lift pumps, or as a bottom valve in front of the pump, suitable for water, sea water, steam, oil, chemicals, chlorine, oxygen, and steam. Can be installed horizontally or vertically.
Application scope:
It is suitable for industrial, environmental protection, sewage treatment, high-rise building water supply and drainage pipelines, etc. It can also be used for environmental systems with corrosive media such as power plants and steel plants gypsum slurry.

Product name: Wafer double plate check valve (metal seated)
National standard number: H76H(W)-16C(16P, 16R, 16RL)
Size range: DN40-DN1200

H76-wafer type dual plate check valve metal seated

Pressure rating: PN10/16/25/40/64/100
Temperature range: -20℃ -350℃
Body material: WCB, A105, CF8, CF3, CF8M.CF3M and other materials and special steel
Valve plate material: WCB, A105.2CR13, 304.304L.316.316L and other materials and special steel
Valve shaft material: A105.2CR13, 304.304L.316.316L and other materials and special steel
Valve seat material: 2CR13, 304.304L.316.316L, STL and other materials and special steel
Application range: water, steam, oil, nitric acid, acetic acid, strong oxidizing medium and urea and other media
More video for wafer dual plate check valve, please see below:
https://www.youtube.com/watch?v=pGrkznOd-JA
https://youtu.be/etwT8RX-S3Q
https://www.youtube.com/watch?v=XqRRI7o-LFI

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Installation instructions of the wafer type butterfly valve

July 21, 2020

Preparation before installation of wafer type butterfly valve:
1. Check whether the specifications and materials of the butterfly valve conform to the design before installation.

wafer type butterfly valve, EPDM seat (10)

2. Before installation, clean the internal sand, dust, foreign matter and debris to avoid irregular movement or leakage.
3. The related piping should be properly suspended and fixed according to regulations before installation to avoid improper stress on the valve after installation.
4. The two flange faces of the piping must be aligned parallel and concentric.
5. No additional gasket is needed between butterfly valve and flange during installation.
6. Where the butterfly valve is close to the check valve or the pump, use a divergent joint between the two so that the valve disc will not be hindered from turning off.

Installation steps of wafer type butterfly valve:
1. Open the valve disc 10 degrees before installation. (The same before disassembly)
2. Set auxiliary screws at appropriate positions to adjust the distance between the two flange surfaces.
3. Insert the butterfly valve without touching the two flange surfaces and at the same time penetrate the remaining bolts.
4. After confirming that the center of the butterfly valve is concentric with the center of the flange and the switch position of the valve disc is not the inner diameter of the flange or the adjacent parts are obstructed, the bolts are locked repeatedly in a diagonal and gradual manner until the flange surface touches the end surface of the valve body.
5. After the installation is completed, the degree of full open and full close should be confirmed again.

Operation:
1. Before starting the operation, use air spray to remove foreign objects on the piping, and clean the inner surface of the piping with clean water.
2. Open the valve to check the angle indicator plate, avoid torsion exceeding the opening width, and the closing position cannot be exceeded.
3. The operation of the switch is completely based on the indicator. If other hand tools are applied, the angle indicating plate and the switch will be damaged.
4. When the pressure test of piping is to be done, the valve should be opened.
5. After piping, the valve is in a fully closed state for a long time, and it should be switched on and off once or twice a month to avoid fixation.

Tianjin Tanghaidongyang Co., Ltd. is one of the largest butterfly valve manufacturers in China, main products are butterfly valves, check valves. main products: butterfly valve, lug type butterfly valve, wafer type butterfly valve, U-type butterfly valve, double flange butterfly valve, gate valves, check valves, globe valves, valve parts (Valve body, Valve disc, Valve shaft, Valve seat…)

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

What is a wafer type butterfly valve

July 20, 2020

The butterfly valve plate of the wafer type butterfly valve is installed in the diameter direction of the pipeline. In the cylindrical passage of the butterfly valve body,

Wafer type butterfly valve with worm gear

the disc-shaped butterfly plate rotates around the axis, and the rotation angle is between 0°-90°. When the rotation reaches 90°, the valve is fully opened. This valve is generally installed horizontally. The wafer butterfly valve is simple in structure, small in size and light in weight, and consists of only a few parts. Moreover, it can be opened and closed quickly by rotating 90°, and the operation is simple. At the same time, the valve has good fluid control characteristics.

When the wafer type butterfly valve is in the fully open position, the thickness of the butterfly plate is the only resistance when the medium flows through the valve body, so the pressure drop generated by the valve is small, so it has better flow control characteristics. The butterfly valve has two sealing types: elastic seal and metal seal. Elastic sealing valve, the sealing ring can be embedded in the valve body or attached to the periphery of the butterfly plate.

Valves with metal seals generally have a longer life than valves with elastic seals, but it is difficult to achieve a complete seal. Metal seals can adapt to higher operating temperatures, while elastic seals have the defect of being limited by temperature.

If the wafer type butterfly valve is required to be used as a flow control, the main thing is to correctly select the size and type of the valve. The structure principle of the butterfly valve is especially suitable for making large diameter valves. Butterfly valves are not only widely used in general industries such as petroleum, gas, chemical, and water treatment, but also used in cooling water systems of thermal power stations.

Commonly used butterfly valves include wafer butterfly valves and flanged butterfly valves. Wafer type butterfly valve uses double-head bolts to connect the valve between two pipe flanges. Flange type butterfly valve has flanges on the valve, and bolts are used to connect the flanges at both ends of the valve to the pipe flanges.

Tianjin Tanghai Valve Manufacturing Co., Ltd. is one of the largest butterfly valve manufacturers in China, main products are butterfly valves, check valves. The Key products: butterfly valve, lug type butterfly valve, wafer type butterfly valve, U-type butterfly valve, double flange butterfly valve, gate valves, check valves, globe valves, valve parts (Valve body, Valve disc, Valve shaft, Valve seat…)

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

The main classification method of butterfly valve (2)

July 10, 2020

According to the connection method, the butterfly valve can be devided into four or five types:

1. Wafer type butterfly valve

Wafer type butterfly valve with worm gear

The butterfly plate of the wafer butterfly valve is installed in the diameter direction of the pipeline. The valve is fully open.
Wafer type butterfly valve has simple structure, small volume and light weight. There are two types of butterfly valve: elastic seal and metal seal. Elastic sealing valve, the sealing ring can be embedded on the valve body or attached to the periphery of the butterfly plate.

2. Lug butterfly valve

2 lug-type-butterfly-vlave-6

The butterfly plate of the lug butterfly valve is installed in the diameter direction of the pipeline. The butterfly plate rotates around the valve shaft, and the rotation angle is between 0°-90°. When it rotates to 90°, the valve is fully open.

3. Flanged butterfly valve

U-type flange butterfly valve, ductile iron, DI, center line,

Double flange butterfly valve (4)

The flanged butterfly valve has a vertical plate structure, and the valve stem is an integral type. Metal hard seal, valve sealing ring
It is a composite structure of flexible graphite plate and stainless steel plate, which is installed on the valve body, and the sealing surface of the butterfly plate is welded with stainless steel. The sealing ring of the soft seal valve is made of nitrile rubber, EPDM or VITON, and is installed on the butterfly plate. The sealing seat of the centerline sealed flange butterfly valve is directly fusion bonded on the valve body.
Flanged butterfly valves are divided into U-shaped butterfly valves and double-flanged butterfly valves according to the length of the structure. The U-type butterfly valve has a relatively short face to face structure, which reduces the weight of the valve body and saves space for use.

4. Welded butterfly valve
Welded butterfly valve is a non-hermetic butterfly valve, widely used in the construction materials, metallurgy, mining, electric power and other production processes, the medium temperature ≤300 ℃, the nominal pressure is 0.1Mpa pipeline, used to communicate, open or close or adjust the medium volume.

The electric regulating butterfly valve belongs to a variety of electric valves and electric regulating valves. The main connection methods are: flange type and wafer type, which are important execution units in the field of industrial automation control. Two major analysis points for the installation points of the electric adjustment butterfly valve: the installation position, height, and inlet and outlet directions must meet the design requirements. Note that the direction of the medium flow should be consistent with the direction of the arrow marked on the valve body, and the connection should be firm and tight. Before installing the electric butterfly valve, a visual inspection must be carried out. The nameplate of the valve should comply with the provisions of the current national standard “General Valve Mark” GB12220. For valves with a working pressure greater than 1.0 MPa and acting as a shut-off on the main pipe, a strength and tight performance test should be carried out before installation. Use only after passing the test. During the strength test, the test pressure is 1.5 times the nominal pressure, the duration is not less than 5min, and the valve housing and packing should be leak-free. The electric adjustable butterfly valve can be divided into offset plate type, vertical plate type, inclined plate type and lever type according to the structural form; according to the sealing form, it can be divided into two types: soft seal type and hard seal type; soft seal type generally adopts rubber ring seal, hard seal type Usually a metal ring seal is used.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Posts

wafer type single plate swing check valve manufacturer

Commonly used valve body materials of centerline wafer butterfly valve

Field Application of Electric resilient seated Wafer Butterfly Valve

Wafer type dual plate check valve: metal seated vs resilient seated

Installation instructions of the wafer type butterfly valve

What is a wafer type butterfly valve

The main classification method of butterfly valve (2)

Portfolio Items

Wafer type butterfly valve (TH-BTV-AW)

TH VALVE • PROFESSIONAL VALVE MANUFACTURER

GET IN TOUCH WITH US