single disc check valve Archives

Single-plate check valve is also called single-disc check valve, wafer check valve: it is a valve that can automatically

6 single-plate-swing-check-valve-2

prevent fluid backflow. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the pressure on the inlet side is lower than that on the outlet side, the valve flap is automatically closed under the action of the fluid pressure difference, gravity and other factors to prevent the fluid from flowing back. It can be installed horizontally or vertically. For vertical installation, pay attention to the water flow from bottom to top, and pay attention to whether the installation direction is correct.

There are two types of check valves. One is installed at the end of the vertical suction pipe in front of the water pump bai. The purpose is to fill the water pump without pumping water once, because the water pump can only be used when there is no water in the pump and the suction pipe in front of the pump. Idling cannot pump water, so the pump must be filled with water to pump out water. The installation of this pump is a method when it is above the liquid level. It is also called a negative pressure method such as pumping water up from a well. Another way to install the pump is that the liquid level is higher than the pump. This method is generally used for secondary water supply. Because the liquid level is higher than the pump, it is not necessary to close the pump outlet valve when starting and stopping the pump, so the check valve should be installed in the The rear of the water pump.
Whether the check valve is installed before or after the valve does not affect its function.

Precautions for installation of single plate check valve

1. The check valve is a one-way valve, so the installation position, height, and direction of inlet and outlet must meet the design requirements, and the direction of medium flow should be consistent with the direction of the arrow marked on the valve body.

2. Check the appearance before installing the check valve. The nameplate of the valve should comply with the current national standard “General Valve Marking” GB 12220. It can be used after all standards are qualified.

1. Do not allow the check valve in the pipeline to bear weight, especially the large check valve, which should have an independent support and not be affected by the pressure generated by the pipeline.

Process design of check valve:
(1) The quality control of the main body blank. All parts of this valve are forgings. The forging process is carried out

8 tilting-disc-swing-check-valve-3

in strict accordance with the forging process regulations and process cards. The initial forging temperature, final forging temperature, deformation degree and deformation speed are strictly controlled, and the process regulations stipulate The cooling method performs cooling. Chemical composition analysis, mechanical property test, intergranular corrosion test, metallographic analysis of the forged product are carried out. After analysis, test and determination, they all meet the corresponding standards.

The quality of the forgings is guaranteed by ultrasonic inspection and liquid penetration inspection. The forgings are 100% ultrasonically inspected and evaluated in accordance with RCC-M requirements, and liquid penetration inspections and evaluations are performed on all surfaces of the forgings.

(2) Welding In order to improve the quality of surfacing welding, plasma argon arc welding is used for surfacing welding of the sealing surface of the valve disc and the valve seat. At the same time, in order to ensure the welding quality, the welding process used in production was re-qualified.

(3) Assemble test High-quality products not only require high-precision components, but also how to assemble these high-precision components into high-performance products. China Nuclear Su Valve has organized an assembly and commissioning team composed of multiple technicians and senior technicians with rich experience and excellent technology. It is responsible for valve assembly, commissioning and testing. It has formulated the cleaning process and assembly process of parts and components. Strictly check and keep improving during the commissioning to ensure the successful assembly and commissioning of the valve. Various performance tests have been carried out, and all indicators meet the requirements of the design task book.

(4) Process inspection has prepared a quality plan for the valve to ensure that the valve has been quality controlled from raw materials, blank input, machining, welding, heat treatment, non-destructive testing, cleaning, assembly, factory testing and various type tests, and has been verified Recognition and on-site witness by the Second Industrial Research and Design Institute.

Butterfly double flap check valve is suitable for high-rise building water supply pipe network, pipe network with

double-wing-check-valve-3

certain chemical corrosive medium, pipe network with limited installation space, and also suitable for sewage pipe network.

The lift-type silent check valve is suitable for pipe networks with high quality requirements for water supply and drainage projects; pipe networks with relatively high pressure requirements (PN2.5Mpa); it can be installed at the outlet of the pump and is an economical and practical waterproof hammer check valve.

The lift-type silencing check valve is suitable for water supply and drainage systems and high-rise building pipe networks. It can be installed at the outlet of the pump. With a slight structural change, it can be used as a suction bottom valve, but it is not suitable for sewage pipe networks.

The horizontal check valve is suitable for diving, drainage and sewage pumps, especially for sewage and sludge

6 single-plate-swing-check-valve-2

systems.

Swing rubber check valve is suitable for domestic water pipe network; but not suitable for sewage with a lot of sediment

Swing single check valve is suitable for water supply system, petroleum, chemical industry, metallurgy and other industrial sectors. It is most suitable for places with installation space restrictions.

Posts

What is a single plate check valve

Process design of check valve

TH VALVE • PROFESSIONAL VALVE MANUFACTURER

GET IN TOUCH WITH US

Tag Archive for: single disc check valve

Posts

TH VALVE • PROFESSIONAL VALVE MANUFACTURER

GET IN TOUCH WITH US