Tag Archive for: RS gate valve

Posts

Difference between NRS gate valve and RS gate valve

NRS gate valve, means Non-rising Stem gate valve; RS gate valve, means Rising stem gate valve. you can see the difference in appearance on below photos.

Gate valve is one of the most common valves in piping systems. Because it can only be fully open and fully open, gate valves are commonly used when the fluid medium in the pipeline needs to be cut off. The operation of the gate valve does not need to be so frequent. Gate valves are widely used because they can be divided into many types. Different gate valve types have certain differences in use. This article mainly analyzes the difference between the RS gate valve and the NRS gate valve.

rising stem gate valve-RS-BB OS&Y (3)

rising stem gate valve-RS-BB OS&Y (3)

Gate valves are classified according to the type of stem, which can be divided into two types: RS gate valve and NRS gate valve. The two are different in transmission mode, valve body structure, installation space, application range, etc.
1. The difference in the transmission mode. The transmission mode of the RS gate valve is that the handwheel drives the nut to rotate in place, and the valve stem rises and falls linearly. Through the threaded drive of the valve stem and the steering wheel, the valve flap is raised and lowered to complete the switch; the NRS gate valve is manual The wheel drives the valve stem to rotate. The hand wheel and the valve stem are connected together and relatively immovable. There are threads in the gate, and the valve stem rotates at a fixed point to drive the gate to rise and fall.
Second, the difference in structure, the structure of the rising stem gate valve is that the stem nut is on the bonnet or bracket. When the gate is opened and closed, the stem nut is rotated to realize the lifting of the stem. The structure of the NRS gate valve is that the stem nut is in the valve body and is in direct contact with the medium; when opening and closing the gate, it is realized by rotating the stem.

DIN-F4-BB-NRS-soft seated-wedge gate valve-DN100-PN16-copper holding ring-handwheel (3)

DIN-F4-BB-NRS-soft seated-wedge gate valve-DN100-PN16-copper holding ring-handwheel (3)

Third, the difference in installation space, the rising stem gate valve requires a larger installation space due to the stem; the height of the NRS gate valve is small, and it will not take up too much space during installation.
Fourth, the difference in application scope, the structure of the rising stem gate valve is beneficial to the lubrication of the stem, and the degree of opening and closing is obvious; the stem thread of the NRS stem gate valve is not only unable to be lubricated, but it is directly corroded by the medium and is easily damaged. Therefore, the RS gate valve is more The NRS stem gate valve has a wider range of applications.

The above is the difference between the RS gate valve and the NRS gate valve. Next, I will introduce you a little common sense, how to judge the RS gate valve and the NRS gate valve:

The stem of the RS gate valve drives the gate to move up and down together. The drive thread on the stem is outside the valve body. The opening and closing and position of the gate can be intuitively judged according to the movement direction and position of the stem; the drive thread of the NRS gate valve is located on the valve. Inside the body, during the opening and closing process, the valve stem only rotates, the gate moves up and down in the valve body, and the valve opens and closes until the steering wheel does not rotate.

TH Valve is a professional manufacturer of butterfly valvegate valvecheck valveglobe valveknife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Related news/knowledge:
Non-rising stem(NRS) and rising stem(RS) gate valve;
structures and differences of Non-rising stem(NRS) and rising stem(RS) gate valve;
How many types of gate valves?
The working principle of butterfly valve (picture)

Non-rising stem(NRS) and rising stem(RS) gate valve

structures and differences of Non-rising stem(NRS) gate valve and rising stem(RS) gate valve
RS gate valve structure picture, NRS gate valve structure picture

non-rising stem gate valve-open and close position

non-rising stem gate valve-open and close position

RS gate valve and NRS gate valve are different from the transmission mode. RS gate valve is a handwheel that drives a nut to rotate in place, and the stem is linearly raised and lowered to complete the switch; NRS gate valve is a handwheel that drives the stem to rotate, and there are threads in the gate. Nut) to move up and down to complete

the switch.
Structural principle of gate valve:
1. NRS gate valve structure: The stem nut is in the valve body and is in direct contact with the medium. When opening and closing the gate, it is realized by rotating the valve stem.
2. RS gate valve structure: the stem nut is on the bonnet or bracket. When opening and closing the gate, the stem nut is rotated to realize the lifting of the stem.

DIN-F4-BB-NRS-soft seated-wedge gate valve-DN100-PN16-copper holding ring-handwheel (3)

DIN-F4-BB-NRS-soft seated-wedge gate valve-DN100-PN16-copper holding ring-handwheel (3)

The difference between RS gate valve and NRS gate valve:
1. RS gate valve can see the screw, but NRS can not see the screw;
2. The RS gate valve raises or lowers the disc through the threaded transmission of the valve stem and the steering wheel; when the NRS gate valve is switched on and off, the steering wheel and the valve stem are connected and relatively immobile. It drives the valve through the rotation of the valve stem at a fixed point. The flap is lifted up and down to complete the opening and closing;
3. The transmission thread of the NRS gate valve is located inside the valve body. During the opening and closing process, the valve stem only rotates, and the gate is raised and lowered in the valve body; the valve stem of the RS gate valve drives the gate to rise and fall together, and the drive thread on the valve stem Outside the valve body, the opening and closing and position of the gate can be intuitively judged according to the movement direction and position of the valve stem;

rising stem gate valve-RS-BB OS&Y (3)

rising stem gate valve-RS-BB OS&Y (3)

4. The height of the NRS gate valve is small; the RS gate valve requires a larger installation space;
5. The structure of the RS gate valve is beneficial to the lubrication of the valve stem, and the degree of opening and closing is obvious; the thread of the valve stem of the NRS gate valve is not only unable to be lubricated, but it is directly corroded by the medium and is easily damaged. Therefore, the RS gate valve is more widely used.

Related news /knowledge:
structures and differences of Non-rising stem(NRS) and rising stem(RS) gate valve;
Characteristics and working principle of electric globe valve;
The working principle of butterfly valve (picture);
How many types of gate valves?;

Portfolio Items