Tag Archive for: lift swing check valve

Posts

Working principle diagram of lift check valve

Lifting check valve structure:

Lifting check valve is a kind of valve that prevents pipeline media from flowing back, mainly composed of valve body, valve seat, valve flap, valve cover and other related parts. The lift check valve is equipped with a spring to ensure that the disc is always in a dynamic equilibrium state under the action of the spring. Regardless of the medium pressure at the inlet of the valve, the valve can maintain a balanced operation.

lift check valve Working principle diagram

lift check valve Working principle diagram

The working principle of the lift check valve:

The lift check valve has a guide rod on the disc, which can move up and down freely in the guide hole of the valve cover. When the pipeline medium flows in in the specified direction (from left to right), and the pressure below the valve flap exceeds the pressure above it, push the valve flap to rise along the center line of the guide hole of the valve cover, and the valve will automatically open to allow the medium to flow; if the fluid flows from the right to the right Left flow, that is, when it flows backward, the pressure above the valve flap is greater than the pressure below it. The pressure difference between the upper and lower pressures and the weight of the valve flap press the valve flap on the valve seat, so that the medium cannot pass through, that is, the fluid cannot flow back; and pipeline fluid The greater the pressure, the tighter the sealing surface is, and the better the sealing effect.

The seat sealing surface of the lift check valve can be welded, or it can be made into a seat sealing ring and then expanded or threaded on the valve body; when the valve body is made of stainless steel, the sealing surface can also be on the valve body It is directly processed from above. The sealing surface of the disc can be directly processed on the disc, or can be processed after surfacing or welded on the disc with the inner and outer periphery of the sealing ring. The straight-through lift check valve can only be installed on the pipeline in a balanced way, and the center line of the valve flap is vertical to the horizontal plane, while the vertical lift check valve is not subject to this restriction.

Introduction of Carbon steel lift check valve H41H-16C

H41H-16C carbon steel lift check valve (check valve) is also known as one-way valve or check valve. Its opening and

lift-swing-check-valve-2

lift-swing-check-valve-2

closing parts are opened or closed by the flow and force of the medium, and its function is to prevent the medium in the pipeline from flowing back .
check valve can be divided into three types according to the structure: lift check valve, swing check valve and butterfly check valve. Lift check valves can be divided into two types: vertical and horizontal; swing check valves are divided into three types: single, double and multiple; butterfly check valves are straight-through. The above-mentioned check valves can be divided into threaded connection, flange connection, wafer type and welding in connection form.
Attention to the installation of H41H-16C carbon steel lift check valve:
1. Do not allow the check valve to bear weight in the pipeline, and the large check valve should be independently supported so that it is not affected by the pressure generated by the pipeline system.
2. When installing, pay attention to the direction of medium flow should be consistent with the direction of the arrow marked on the valve body.
3. Lifting vertical flap check valve should be installed on the vertical pipeline.
4. Lifting horizontal flap check valve should be installed on the horizontal pipeline.

The products of Tianjin Tanghai Valve Manufacturing Co., Ltd. are:
1. Lift check valve: materials include cast iron, cast steel, stainless steel, chromium molybdenum steel; pressure: 1.0-16Mpa; connection methods include threaded connection, flange connection, welding; nominal pass: DN25-1200
Such as: cast steel lift check valve H41H-16C; stainless steel lift check valve H41W-16P; water pump bottom valve H42W-10/H42H-16C/H42W-16P.
Silence check valve HC41T-10; Silent check valve H42T-10; Spherical check valve HQ41X-10; Vertical fluorine-lined check valve H42F-10; Fluorine-lined lift check valve H41F46-16C; Wafer Muffler check valve H71T-10; Welded check valve H61H/Y-160
2. Swing check valve: the materials are cast iron, cast steel, stainless steel, chromium molybdenum steel; pressure: 1.0-16Mpa; connection methods include threaded connection, flange connection, welding; nominal passage: DN25-1200
Such as: cast steel swing check valve H44H-16C; stainless steel swing check valve H44W-16P; cast iron swing check valve H44T-10; rubber flap swing check valve HC44X-10; threaded connection Swing check valve H14H-16C/H14W-16P/H14T-10, H74W/F-16P.
3. Butterfly check valve: the materials are cast iron, cast steel, stainless steel, chromium molybdenum steel; pressure: 1.0-16Mpa; connection methods include threaded connection, flange connection, welding; nominal diameter: DN25-1200
Such as: double disc butterfly check valve H76H-16C/H76W-16P; micro resistance slow closing check valve HH47H-16C/HH48H-16C/HH49H-16C

To ensure your requirements, please specify when ordering:
1. For new project users, please provide the model designed by the design institute, and for replacement parts users, please provide the product model used before
2. If there is no specific model, please provide: 1. Use medium and temperature; 2. Working pressure; 3. Transmission method; 4. Connection method; 5. Structure form;
6. Nominal diameter, etc.
To
H41H-16C carbon steel lift check valve model, performance parameters, structure size parameters, price and other details. (Note: All text, data, and pictures in this article are for reference only. If you need detailed parameters, please call Senpin Company. With professional technology, professional manufacturing, and professional services, Tanghai Valve is committed to meeting user expectations , Constantly improve service quality, keep improving, “Sincere Service” is the eternal theme of Senpin. If you need help, please contact our sales Harry Li.)

TH VALVE is one of the largest butterfly valve manufacturers in China, main products are butterfly valves, check valves. Our products use advanced manufacturing technology, and strictly conform to API, DIN, BS, EN, ISO, GB and other international standards. The main products are butterfly valves, gate valves, check valves, globe valves, valve parts (Valve body, Valve disc, Valve shaft, Valve seat…), etc. Our products are widely used in various fields such as marine industry, shipbuilding, petrochemical, metallurgy, water treatment, fire fighting, water supply and drainage, etc. The company has won unanimous recognition and praise from customers with high quality and good reputation.

Related news /products:
Introduction of cast steel lift swing check valve;
The difference between carbon steel and cast steel;
Working principle diagram of lift check valve;
Classification of check valves;

Introduction of cast steel lift swing check valve

1. Overview of Cast steel lift check valve:

The lift check valve is selected for the pipelines of various working conditions such as petroleum, chemical industry

lift swing check valve (2)

lift swing check valve (2)

and thermal power plants with a nominal pressure of PN1.6~6.4MPa and a working temperature of -29~550℃. Applicable media are: water, oil, steam, etc.

2. Structural features of Cast steel lift check valve:

1. Exquisite selection of materials, in line with domestic and foreign standards, the highest quality of materials.

2. The sealing pair is advanced and reasonable. The sealing surface of the valve disc and the valve seat is made of iron-based alloy or Stellite cobalt-based cemented carbide. It has good wear resistance, high temperature resistance, corrosion resistance and scratch resistance. ,long lasting.

3. The products are designed and manufactured according to the national standard GB/T12235.

4. Various piping flange standards and flange sealing types can be used to meet various engineering needs and user requirements.

5. The valve body has a complete range of materials, and the gasket can be reasonably selected according to actual working conditions or user requirements, and can be suitable for various pressure, temperature and medium working conditions.

According to user requirements, check valves with different structures and connections can be designed and manufactured for use with various equipment.

H41H lift check valve: Do not allow the check valve to bear weight in the pipeline. Large-scale check valves should be independently supported to prevent them from being affected by the pressure produced by the pipeline system. When installing, pay attention to the direction of medium flow should be consistent with the arrow direction indicated by the valve body. Suitable for water, steam, oil, nitric acid, acetic acid, oxidizing medium, urea and other media.

H41H, H41Y type PN16~PN100 lifting steel check valve is one of the important links in the production process regulation system. It is a valve that controls the one-way flow of the medium in the pipeline to prevent the medium from flowing back. It is widely used in purification equipment, petroleum, chemical industry, metallurgy, electric power, textile and other production processes.

Product features of lift check valve:

1. H41H and H41Y lift-type steel check valves have the advantages of simple structure, reliable action and convenient maintenance.

2. When the medium flows into the valve body from the direction indicated by the arrow of the valve body, the pressure of the medium acts on the valve flap to produce an upward thrust. When the medium thrust is greater than the weight of the valve flap, the valve opens. When the force of the medium pressure acting on the disc after the valve plus the weight of the disc itself is greater than the force of the pressure acting on the disc before the valve, the valve is closed to prevent the medium from flowing back.

Lift check valve refers to the valve that automatically opens and closes the valve flap depending on the flow of the medium itself to prevent the medium from flowing back, also known as check valve, one-way valve, reverse flow valve, and back pressure valve. Check valve is a kind of automatic valve, its main function is to prevent the back flow of the medium, prevent the pump and drive motor from reversing, and discharge the container medium. Check valves can also be used to supply pipelines for auxiliary systems whose pressure may rise above the system pressure. Check valves can be divided into swing check valves (rotating according to the center of gravity) and lift check valves (moving along the axis).

Check valves are also called check valves, check valves, reverse flow valves, and back pressure valves.

The function of the check valve is to only allow the medium to flow in one direction and prevent the reverse flow. Usually this kind of valve works automatically. Under the action of the fluid pressure flowing in one direction, the valve flap opens; when the fluid flows in the opposite direction, the fluid pressure and the self-coincidence of the valve flap act on the valve seat, thereby cutting off the flow. Among them, the internal thread check valve and the butterfly check valve belong to this type of valve.

It includes swing check valve and lift check valve. The swing check valve has a hinge mechanism and a valve flap like a door that rests freely on the inclined valve seat surface. In order to ensure that the valve clack can reach the proper position of the valve seat surface every time, the valve clack is designed in a hinge mechanism so that the valve clack has enough space for rotation and makes the valve clack really contact the valve seat. The valve disc can be made of metal, or inlaid with leather, rubber, or synthetic covering, depending on the performance requirements. When the swing check valve is fully opened, the fluid pressure is almost unimpeded, so the pressure drop through the valve is relatively small. The valve disc of the lift check valve is seated on the sealing surface of the valve seat on the valve body. Except that the disc can be lifted and lowered freely, the rest of this valve is like a shut-off valve. The fluid pressure lifts the disc from the sealing surface of the valve seat, and the backflow of the medium causes the disc to fall back onto the seat and cut off the flow. According to the conditions of use, the valve disc can be an all-metal structure, or it can be in the form of a rubber pad or a rubber ring inlaid on the disc holder. Like a shut-off valve, the passage of fluid through the lift check valve is also narrow, so the pressure drop through the lift check valve is larger than that of the swing check valve, and the flow rate of the swing check valve is restricted Rarely.

Portfolio Items