Tag Archive for: handle butterfly valve

Posts

Advantages of the handle butterfly valve of Tanghai valve manufacturer

What are the advantages of handle butterfly valve? To understand this, let’s first understand the handle butterfly valve. The handle butterfly valve is a kind of manual butterfly valve. The common materials for making the handle butterfly valve are gray cast iron, ductile iron, cast steel, stainless steel, etc. The handle butterfly valve is the most common pipeline accessory in the pipeline system. It is generally required to be installed horizontally, and the

marine valve; butterfly valve; check valve; gate valve; manufacturer in China

marine valve; butterfly valve; check valve; gate valve; manufacturer in China

butterfly plate of the handle butterfly valve is installed in the diameter direction of the pipeline. The switch operation is also very simple and convenient. Rotate the handle, the handle drives the valve stem to rotate, and the circular butterfly plate rotates around the valve stem. Usually, it is turned on by turning counterclockwise, and turned off by turning clockwise. The rotation angle is 0°-90°. Between °, when the disc rotates to 90°, the valve is fully open.
The handle butterfly valve has a simple structure and small volume. It can be seen in the water treatment, urban water supply and drainage, petroleum, chemical industry, and even the cooling water system of the thermal power station.

JIS 10K-wafer butterfly valve-backup seat (4)

JIS 10K-wafer butterfly valve-backup seat (4)

Tanghai Valve is committed to providing high-quality valve products and services to the society. The handle butterfly valve has always been our flagship product and one of the most satisfied products for customers. So in the highly competitive valve market, what are the advantages of the handle butterfly valve of Tanghai valve manufacturers?

1. Different handle design
The handle end of the handle butterfly valve adopts a humanized arc structure, which will not let the operator hurt his hand during operation, and it is more labor-saving to open and close.

2. Stainless steel handle bolts and disc pins
The bolts used on the handle and the pins on the butterfly plate are all made of stainless steel, and the corrosion resistance is more than 10 times that of ordinary products, making it safer to use.

3. Reinforcement at both ends of the butterfly plate
In order to prevent the instantaneous impact of the flowing medium to break the butterfly plate after the butterfly valve is installed, four reinforcing ribs are specially added at both ends of the butterfly plate.

4. Valve seat for vulcanization process
In order to ensure the sealing performance of the valve, the valve seat adopts the vulcanization process, which makes the valve seat and the valve body fit better, and the sealing surface is wider, which is more reliable than the sealing performance of ordinary butterfly valves.

5. Valve body painted with epoxy paint
If the butterfly valve is installed outdoors, the valve body is exposed, and it is easy to rust, which affects the service life of the valve. For this reason, Tanghai Valve specially sprays the valve body with epoxy resin paint, which makes the valve body of the butterfly valve more resistant to oxidation and can be safely installed outdoors.

6. Pressure test higher than the national standard
Each butterfly valve of Tanghai Valve must pass a pressure test higher than the national standard before leaving the factory.

7. Universal universal valve body
Tanghai Valve’s wafer butterfly valve adopts universal universal body, which can meet the national standard, German standard, American standard, Japanese standard, Korean standard, British standard and other standards at the same time, so as to meet the needs of different customers.

8. The natural rubber content of the valve seat exceeds 40%
The natural rubber content of the valve seat of the soft sealing butterfly valve is more than 40%, which has a longer service life than ordinary rubber.

TH Valve is a professional manufacturer of butterfly valvegate valvecheck valveglobe valveknife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Video of center-lined butterfly valve:

Related news/knowledge:
Features of Stainless Steel Valves
Purchasing precautions for handle butterfly valves
Sealing Surface Structure of Handle Wafer Type Butterfly Valve
Structural Characteristics and application of Centerline Butterfly valves

Purchasing precautions for handle butterfly valves

When purchasing handle butterfly valves, it is not enough to only know the product specifications, categories and working pressure requirements, and it is impossible to achieve a good balance. Because different handle butterfly valve manufacturers have their own corporate standards and product personality, and some non-standard

JIS 10K-wafer butterfly valve-backup seat (4)

JIS 10K-wafer butterfly valve-backup seat (4)

production to meet different customer requirements, it is unscientific to purchase valves based on rigid requirements such as specifications. So what should we refer to? There are mainly several aspects, including working pressure, caliber, what medium to pass, and what to use, etc. When purchasing valves, detailed technical parameters must be listed and a consensus must be reached with the valve manufacturer. Below we introduce in detail:
1. Working conditions
Valve specifications and types should be combined with the requirements of pipeline planning documents, that is, working conditions. The model of the valve should indicate the national standard number it is based on. The working pressure of the valve, the working pressure of the pipeline, and the working pressure that the valve can take over should be greater than the actual working pressure of the pipeline. Either side of the valve in the closed state should be able to take over 1.5 times the valve working pressure without leakage. When the handle butterfly valve is in the open state, the valve body needs to be able to take over twice the pressure of the valve. The valve manufacturing standard should be clearly based on the national standard number.
2. Valve standard quality
The material of the valve body should be mainly carbon steel and stainless steel. Stem material, stainless steel stem that is not easy to rust is more commonly used, and the nut material is mostly brass or bronze. The material of the sealing surface can be divided into metal seal and soft seal. The valve seat and valve plate are made of metal material, which is a hard seal, including stainless steel, ductile iron, etc. If one side between the valve seat and the valve plate is made of elastic material such as rubber, tetrafluoroethylene, etc., it is a soft sealing butterfly valve. When purchasing soft-seal handle butterfly valves, the physical, chemical and hygienic testing data of the valve plate lining material should be clear. For the sanitary, anti-aging performance, and wear resistance of the handle butterfly valve, you must also understand the manufacturer.
The above is the best technical knowledge to know when purchasing handle butterfly valves. At present, many valve factory products in our country still have the shortcomings of internal leakage, low appearance quality, short life, inflexible operation, and unreliable valve electric and pneumatic devices. Some high temperature, high pressure and valves required on key devices still rely on imports. Therefore, in order to make a breakthrough in the industry, Tanghai Valve has a clear focus on the concept of boutique: whether it is the exhibits at the exhibition or the parts seen by the visiting enterprises, the appearance of Tanghai Valve is neat and delicate, and the parts protection is in place. Small parts Use plastic protective covers, wooden seats and leather pads for large parts. These details are countless, all in order to establish a better brand image and increase the trust of new customers in the product. If you want to purchase handle butterfly valves, please come to Tanghai to visit and purchase, more professional and more assured.

TH Valve is a professional manufacturer of butterfly valvegate valvecheck valveglobe valveknife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Video of center-lined butterfly valve: https://youtu.be/NuSZH_AJcwY

Related news/knowledge:
Introduction to the Features of Lever Wafer Butterfly Valve
The correct operation method of manual valve
Installation requirements for manual butterfly valves
Resilient seated /soft-seal butterfly valve prices

Introduction to the Features of Lever Wafer Butterfly Valve

Lever or Handle wafer butterfly valve is a kind of butterfly valve, usually with soft seal, which consists of a sealing surface made of rubber or fluoroplastic as a sealing material and a valve plate and stem made of carbon steel or

wafer-type-butterfly-valve-with-handle-13

wafer-type-butterfly-valve-with-handle-13

stainless steel. Due to the limitation of the sealing surface material, the handle wafer butterfly valve is only suitable for water, gas, oil and other fluid media with a temperature of ≤80~120℃. The application fields include chemical industry, petroleum, electric power, textile, papermaking, construction water supply and drainage, etc. It is used for on-off control of normal temperature and pressure pipeline media on pipelines that transport various corrosive and non-corrosive fluid media in the engineering system, and can also be used for flow adjustment.
Handle wafer butterfly valves are generally only suitable for small-diameter valves, that is, valves with a diameter less than or equal to DN200mm. Because the small-diameter torque is relatively small, the opening and closing of the valve can be directly controlled by hand. The caliber is greater than 200mm, and according to the specific size of the caliber, it needs to be equipped with a turbine head, a pneumatic device or an electric device.
Because the handle wafer butterfly valve is a soft sealing butterfly valve, when the valve is installed and used, the valve must be opened at an angle, which is generally between 5°-10°. Do not allow the sealing surface rubber to be squeezed for a long time. state.
The main features of the handle wafer butterfly valve are:
1. The design structure is simple and unique, small in size, light in weight, and easy to operate.
2. Small-caliber operating torque is small, labor-saving and dexterous, opening and closing quickly.
3. It can be installed at any position of the pipeline, which is very convenient for installation and maintenance.
4. Handle wafer butterfly valves are usually soft-sealed, with reliable sealing performance, and can achieve two-way sealing with zero leakage.
5. The sealing surface material is easy to replace, resistant to aging, weak corrosion, and has a long service life.
Founded in 1994, Tanghai Valve is a professional valve manufacturer integrating design, development, production, sales, installation and service, and a high-quality valve manufacturer. The leading products include: wafer butterfly valves, flanged butterfly valves, hard-sealed butterfly valves, gate valves, butterfly check valves and other water series control valve products and related supporting pipeline accessories. The product sales range covers all parts of the country, and it has developed steadily in developing countries and regions such as Asia, Africa, and Latin America, and has successfully opened markets in developed countries and regions such as Europe and the United States. Products are widely used in water supply and drainage, electric power, petrochemical, metallurgical and other industries.

TH Valve is a professional manufacturer of butterfly valvegate valvecheck valveglobe valveknife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Related news/knowledge:
The correct operation method of manual valve
Gate valve characteristics and installation notes
What is a wafer type butterfly valve
electric wafer butterfly valve vs electric flange butterfly valve