electric gate valve Archives

Design Features of Electric Gate Valve

September 9, 2021

An electric gate valve is a gate valve that uses an electric actuator to control the opening and closing of the valve. Its structure can be divided into upper and lower parts, the upper part is the electric actuator, and the lower part is the gate valve body. Connect the electric actuator and the gate valve, after installation and debugging, it becomes an electric gate valve. The electric gate valve uses electric energy to realize the opening and closing of the valve, so as to control the interception and circulation of the pipeline medium.

DN1000-DIN-F5-NRS gate valve-IS&Y (6)

The switching speed of the electric gate valve can be adjusted, the structure is relatively simple, and the maintenance is easier. Its design structure also has its own characteristics.
1. The electric gate valve adopts pressure self-tightening seal, which has excellent sealing performance and is reliable and safe to use.
2. The electric gate valve adopts a double gate with a universal roof structure in the middle, which can automatically adjust the degree of sealing between the gate and the valve seat to ensure the sealing performance of the valve. At the same time, this structure is very convenient to maintain and save costs.
3. The sealing surface of the gate and the valve seat is made of cobalt-chromium-tungsten cemented carbide by plasma spray welding. The sealing surface has high hardness, and is very wear-resistant and corrosion-resistant, which prolongs the service life of the valve.
4. The valve stem is made of nitrided steel, and the surface is nitrided, which has high hardness, good performance and long life.
5. The electric device of the electric gate valve is equipped with a torque control mechanism, an on-site operating mechanism and a hand and electric switching mechanism. It can also carry out remote operation and intelligent control. It is suitable for use in situations where manual operation is difficult or the pipeline environment is complex and dangerous.
6. When the electric gate valve is used for the first time, during installation and debugging, it is necessary to manually open the valve to about half of the position, so as to avoid the valve or electrical equipment damage due to the reverse connection of the motor phase sequence.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Representation method of electric gate valve model

July 27, 2021

Representation method of electric gate valve model; model name modification method; code name modification method
The electric gate valve is composed of an electric actuator and a gate valve body. The gate plate is controlled by the

gate valve (1)

power supply pressure to perform up and down linear operation to connect or close the fluid medium in the pipeline. The applicable pressure, temperature and caliber range are large, and it is especially suitable for Medium and large diameter pipes. Electric gate valves can be divided into various series. The actuators have on-off type and intelligent type, and the structure is very changeable. When selecting the type, the user should be familiar with the electric gate valve model preparation instructions to avoid selecting the wrong model, placing the wrong order and technology Unknown parameters caused problems such as exchange and return.
Electric gate valve model preparation instructions are mainly for the detailed explanation of the additional conditions of the gate valve, drive mode, connection form, structural feature, sealing material, pressure level and valve body material. Other customized or special product models are not applicable to this method. , Additional explanation is required.
The method of preparing the model of the electric gate valve:
Additional code for gate valve: WZ means bellows gate valve, DZ cryogenic gate valve, NKZ vacuum gate valve, PZ knife gate valve;
Type of gate valve: Z;
Drive mode: manual without code (usually omitted according to regulations), 2 electro-hydraulic, 3 worm gear, 5-bevel gear transmission, 6 pneumatic, 9-electric;
Connection mode: 4 flange connection, 6 welding, 7 pair clip type;
Structural form: 0 elastic gate, 1 open-rod wedge-type single gate, 2-open-rod wedge-type double gate, 3-open-pole parallel single gate, 4-open-pole parallel double gate, 5 concealed Rod wedge single gate, 6 concealed rod wedge double ram, 7 concealed rod parallel single ram, 9 concealed rod parallel double ram;
Sealing material: W valve body is directly processed, T alloy, X rubber, F fluoroplastic, H-Cr stainless steel, Y cemented carbide, M Monel alloy;
Pressure rating: PN1.0-32Mpa, 16=1.6MPA means the pressure is 16 kg, 150LB-1500LB means the American

standard pound pressure, 5-63K means the Japanese pressure;
Valve body material: Z-gray cast iron, Q ductile iron, T alloy, C carbon steel, P stainless steel 304, R stainless steel 316, V chromium molybdenum vanadium steel.

electric stainless steel gate valve

Description of electric gate valve model preparation:
Z941H-16P Stainless steel electric flange gate valve1. Z: represents gate valve;
2. 9: indicates that the transmission mode is electric;
3. 4: The connection method is flange connection;
4. 1: The structure is an open pole wedge single gate;
5. H: The sealing material is stainless steel;
6. 16: Indicates that the nominal pressure is 1.6MPa;
7. P: indicates that the valve body material is stainless steel.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Working principle of electric gate valve

June 30, 2021

Principle of electric gate valve, Working principle of electric gate valve
Principle of electric gate valve:
Electric gate valve, as the name suggests, is to control the gate valve with an electric actuator, which is mainly

electric stainless steel gate valve

divided into an upper part and a lower part. The upper part is an electric actuator, and the lower part is a gate valve. Connect the actuator and the gate valve, and the electric actuator controls the opening and closing of the gate valve to work to achieve the on-off of the pipeline medium. Gate valves are generally suitable for on-off occasions and are normally open and normally closed valves. If you need to adjust the working conditions, generally choose electric control valve, electric ball valve, electric butterfly valve, electric shut-off valve, etc.
Working principle of electric gate valve:
The electric gate valve is powered by electric energy to turn on the electric actuator to drive the valve, and the valve stem is connected to drive the valve plate to move up and down or open and close, so that the valve can control the switch of the pipeline medium. It can be remotely controlled when it is added into the control box and other accessories, which is convenient and trouble-free.
Classification of electric gate valve actuators:
There are two common types of rotary electric actuators and linear electric actuators. Angular-stroke electric actuator: the angular-stroke electric actuator is used in conjunction with the angular-stroke valve to realize the internal rotation of the valve within 90 degrees to control the flow of the pipeline.
Straight-stroke electric actuator: a straight-stroke electric actuator is used in conjunction with a straight-stroke valve to realize the up and down movement of the valve plate to control the on-off of the pipeline fluid. It is usually used in conjunction with equipment with a higher degree of automation.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Posts

Design Features of Electric Gate Valve

Representation method of electric gate valve model

Working principle of electric gate valve

TH VALVE • PROFESSIONAL VALVE MANUFACTURER

GET IN TOUCH WITH US

Tag Archive for: electric gate valve

Posts

TH VALVE • PROFESSIONAL VALVE MANUFACTURER

GET IN TOUCH WITH US