Tag Archive for: dual plate check valve

Posts

lug type dual plate check valve for marine industry-seawater

The dual plate check valve is divided into 3 types: Wafer type dual plate check valve, lug type dual plate check valve and double flanged dual plate check valve.

Classification of lug dual plate check valves: hard-seal lug dual plate check valve and soft-seal lug dual plate check valve; of which soft-seal lug check valve is divided into full-lined soft-seal lug check valve and Semi-lined/normal soft-seal lug dual plate check valve.

lug type dual plate check valve for marine industry-seawater (1)

lug type dual plate check valve for marine industry-seawater (1)

lug dual plate check valve is used for pure pipelines and industrial, environmental protection, water treatment, high-rise building water supply and drainage pipelines, to prevent the reverse flow of the medium. The check valve adopts a clamp type, the butterfly plate is two semicircles, and it adopts a spring for forced reset. The sealing surface can be built-up welding wear-resistant material or rubber lining, with a wide range of use and reliable sealing.

The check valve opening and closing parts are opened or closed automatically by the flow and force of the medium to prevent the medium from flowing back. The valve is called the check valve. Check valves belong to the category of automatic valves, which are mainly used in pipelines where the medium flows in one direction, and only allow the medium to flow in one direction to prevent accidents.

According to the structure of the check valve, it can be divided into three types: lift check valve, swing check valve and butterfly check valve. Lift check valves can be divided into two types: vertical and horizontal. Swing check valves are divided into three types: single valve, double valve and multi valve. The butterfly check valve is a straight-through type. The above-mentioned check valves can be divided into three types in connection form: threaded connection, flange connection and welding. A check valve is a valve that can automatically prevent fluid from flowing back. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the pressure on the inlet side is lower than that on the outlet side, the valve flap is automatically closed under the action of the fluid pressure difference, its own gravity and other factors to prevent the fluid from flowing back.

lug type dual plate check valve for marine industry-seawater (2)

lug type dual plate check valve for marine industry-seawater (2)

Model: H76X/H76H/H76W
Name: lug  dual plate check valve
Please refer to the main technical parameters and spare parts materials:
https://www.tanghaivalve.com/wafer-type-double-disc-swing-check-valve-introduction/
Product name: lug  double plate check valve (soft seal)
National Standard Number: H76X

Size range: DN40-DN1200
Pressure rating: PN10/16/25/40/64/100
Valve features: double valve plate design, short running track of the valve plate, spring load makes the valve plate close more quickly, effectively preventing water hammer
When the valve plate is opened, it is close to 90 degrees, and the pressure loss is small
Zero leakage
Size range: 2″ to 48″
Pressure range: 10bar-50 bar
Suitable flange: National standard or EN1092 PN10/PN16/PN25/PN40 or ANSI 125/150/300
Structure length: EN558 series 16, API594

Material of lug type dual plate check valve:

name materials
Valve body gray cast iron, ductile iron, carbon steel, stainless steel, aluminum bronze
Valve disc ductile iron nickel-plated, stainless steel 201, stainless steel 304, stainless steel 316, aluminum bronze
Valve stem WCB, 2Cr13, Stainless steel, Monel, duplex steel, steel alloy.
Valve seat Rubber, stainless steel, steel alloy, Super Duplex Steel
Spring 60Si2Mn、3Cr13、17-7PH、INCONEL

Uses: Suitable for installation at the outlet of high-lift pumps, or as a bottom valve in front of the pump, suitable for water, sea water, steam, oil, chemicals, chlorine, oxygen, and steam. Can be installed horizontally or vertically.
Application scope:
It is suitable for industrial, environmental protection, sewage treatment, high-rise building water supply and drainage pipelines, etc. It can also be used for environmental systems with corrosive media such as power plants and steel plants gypsum slurry.

Features of lug dual plate Check Valve:

  1. Simple structure and light weight, especially suitable for low-pressure large-diameter pipelines;
  2. The paired clamp connection mode, the production process is simple, and the disassembly and assembly are convenient;
  3. The check valve adopts the clamp type, the butterfly plate is two semicircles, and the spring is forced to reset. The sealing surface can be built-up welding wear-resistant material or rubber lining, with a wide range of use and reliable sealing.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Related news/knowledge:
Wafer type dual plate check valve: metal seated vs resilient seated
The structure and application fields of the lug type butterfly valve
Double eccentric High performance butterfly valve (TH-BTV-DE)

Wafer type dual plate check valve: metal seated vs resilient seated

Wafer dual plate check valve is used for pure pipelines and industrial, environmental protection, water treatment, high-rise building water supply and drainage pipelines, to prevent the reverse flow of the medium. The check valve adopts a clamp type, the butterfly plate is two semicircles, and it adopts a spring for forced reset. The sealing surface can be built-up welding wear-resistant material or rubber lining, with a wide range of use and reliable sealing.

The check valve opening and closing parts are opened or closed automatically by the flow and force of the medium to prevent the medium from flowing back. The valve is called the check valve. Check valves belong to the category of automatic valves, which are mainly used in pipelines where the medium flows in one direction, and only allow the medium to flow in one direction to prevent accidents.

According to the structure of the check valve, it can be divided into three types: lift check valve, swing check valve and butterfly check valve. Lift check valves can be divided into two types: vertical and horizontal. Swing check valves are divided into three types: single valve, double valve and multi valve. The butterfly check valve is a straight-through type. The above-mentioned check valves can be divided into three types in connection form: threaded connection, flange connection and welding. A check valve is a valve that can automatically prevent fluid from flowing back. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the pressure on the inlet side is lower than that on the outlet side, the valve flap is

H46-double flanged dual plate check valve-metal seated

H46-double flanged dual plate check valve-metal seated

automatically closed under the action of the fluid pressure difference, its own

lug type dual plate check valve metal seated (3)

lug type dual plate check valve metal seated (3)

gravity and other factors to prevent the fluid from flowing back.

klug type dual plate check valve metal seated (1)The dual plate check valve is divided into flange dual plate check valve, lug dual plate check valve and wafer dual

plate check valve.

Classification of wafer dual plate check valves: hard-seal wafer dual plate check valve and soft-seal wafer dual plate check valve; of which soft-seal wafer check valve is divided into full-lined soft-seal wafer check valve and Semi-lined/normal soft-seal wafer dual plate check valve.

Features of Wafer dual plate Check Valve:

  1. Simple structure and light weight, especially suitable for low-pressure large-diameter pipelines;
  2. The paired clamp connection mode, the production process is simple, and the disassembly and assembly are convenient;
  3. The check valve adopts the clamp type, the butterfly plate is two semicircles, and the spring is forced to reset. The sealing surface can be built-up welding wear-resistant material or rubber lining, with a wide range of use and reliable sealing.

Model: H76X/H76H/H76W
Name: Wafer dual plate check valve
Please refer to the main technical parameters and spare parts materials:
https://www.tanghaivalve.com/wafer-type-double-disc-swing-check-valve-introduction/
Product name: Wafer double plate check valve (soft seal)
National Standard Number: H76X

dual plates check valve photos-normal sealing (1)

dual plates check valve photos-normal sealing (1)

Size range: DN40-DN1200
Pressure rating: PN10/16/25/40/64/100
Valve features: double valve plate design, short running track of the valve plate, spring load makes the valve plate close more quickly, effectively preventing water hammer
When the valve plate is opened, it is close to 90 degrees, and the pressure loss is small
Zero leakage
Size range: 2″ to 48″
Pressure range: 10bar-50 bar
Suitable flange: National standard or EN1092 PN10/PN16/PN25/PN40 or ANSI 125/150/300
Structure length: EN558 series 16, API594

Body material: gray cast iron, ductile iron, carbon steel, stainless steel, aluminum bronze
Valve plate material: ductile iron nickel-plated, stainless steel 201, stainless steel 304,

dual plates check valve photos- full rubber

dual plates check valve photos- full rubber

stainless steel 316, aluminum bronze
Valve seat material: nitrile NBR, EPDM, oil and acid and alkali resistant fluorine rubber VITON-A, steam resistant fluorine rubber VITON-B, hard seal
Uses: Suitable for installation at the outlet of high-lift pumps, or as a bottom valve in front of the pump, suitable for water, sea water, steam, oil, chemicals, chlorine, oxygen, and steam. Can be installed horizontally or vertically.
Application scope:
It is suitable for industrial, environmental protection, sewage treatment, high-rise building water supply and drainage pipelines, etc. It can also be used for environmental systems with corrosive media such as power plants and steel plants gypsum slurry.

 

Product name: Wafer double plate check valve (metal seated)
National standard number: H76H(W)-16C(16P, 16R, 16RL)
Size range: DN40-DN1200

H76-wafer type dual plate check valve metal seated

H76-wafer type dual plate check valve metal seated

Pressure rating: PN10/16/25/40/64/100
Temperature range: -20℃ -350℃
Body material: WCB, A105, CF8, CF3, CF8M.CF3M and other materials and special steel
Valve plate material: WCB, A105.2CR13, 304.304L.316.316L and other materials and special steel
Valve shaft material: A105.2CR13, 304.304L.316.316L and other materials and special steel
Valve seat material: 2CR13, 304.304L.316.316L, STL and other materials and special steel
Application range: water, steam, oil, nitric acid, acetic acid, strong oxidizing medium and urea and other media
More video for wafer dual plate check valve, please see below:
https://www.youtube.com/watch?v=pGrkznOd-JA
https://youtu.be/etwT8RX-S3Q
https://www.youtube.com/watch?v=XqRRI7o-LFI

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Related news/knowledge:

Process design of check valve

Process design of check valve:
(1) The quality control of the main body blank. All parts of this valve are forgings. The forging process is carried out

8 tilting-disc-swing-check-valve-3

8 tilting-disc-swing-check-valve-3

in strict accordance with the forging process regulations and process cards. The initial forging temperature, final forging temperature, deformation degree and deformation speed are strictly controlled, and the process regulations stipulate The cooling method performs cooling. Chemical composition analysis, mechanical property test, intergranular corrosion test, metallographic analysis of the forged product are carried out. After analysis, test and determination, they all meet the corresponding standards.

The quality of the forgings is guaranteed by ultrasonic inspection and liquid penetration inspection. The forgings are 100% ultrasonically inspected and evaluated in accordance with RCC-M requirements, and liquid penetration inspections and evaluations are performed on all surfaces of the forgings.

(2) Welding In order to improve the quality of surfacing welding, plasma argon arc welding is used for surfacing welding of the sealing surface of the valve disc and the valve seat. At the same time, in order to ensure the welding quality, the welding process used in production was re-qualified.

(3) Assemble test High-quality products not only require high-precision components, but also how to assemble these high-precision components into high-performance products. China Nuclear Su Valve has organized an assembly and commissioning team composed of multiple technicians and senior technicians with rich experience and excellent technology. It is responsible for valve assembly, commissioning and testing. It has formulated the cleaning process and assembly process of parts and components. Strictly check and keep improving during the commissioning to ensure the successful assembly and commissioning of the valve. Various performance tests have been carried out, and all indicators meet the requirements of the design task book.

(4) Process inspection has prepared a quality plan for the valve to ensure that the valve has been quality controlled from raw materials, blank input, machining, welding, heat treatment, non-destructive testing, cleaning, assembly, factory testing and various type tests, and has been verified Recognition and on-site witness by the Second Industrial Research and Design Institute.

Butterfly double flap check valve is suitable for high-rise building water supply pipe network, pipe network with

double-wing-check-valve-3

double-wing-check-valve-3

certain chemical corrosive medium, pipe network with limited installation space, and also suitable for sewage pipe network.

The lift-type silent check valve is suitable for pipe networks with high quality requirements for water supply and drainage projects; pipe networks with relatively high pressure requirements (PN2.5Mpa); it can be installed at the outlet of the pump and is an economical and practical waterproof hammer check valve.

The lift-type silencing check valve is suitable for water supply and drainage systems and high-rise building pipe networks. It can be installed at the outlet of the pump. With a slight structural change, it can be used as a suction bottom valve, but it is not suitable for sewage pipe networks.

The horizontal check valve is suitable for diving, drainage and sewage pumps, especially for sewage and sludge

6 single-plate-swing-check-valve-2

6 single-plate-swing-check-valve-2

systems.

Swing rubber check valve is suitable for domestic water pipe network; but not suitable for sewage with a lot of sediment

Swing single check valve is suitable for water supply system, petroleum, chemical industry, metallurgy and other industrial sectors. It is most suitable for places with installation space restrictions.

Related news /knowledge:
Valve cleaning steps and assembly requirements;
The difference between carbon steel and cast steel;
Knife Gate valve (TH-PZV);
Valve material and valve standards-(1);