code name Archives

Representation method of electric gate valve model

July 27, 2021

Representation method of electric gate valve model; model name modification method; code name modification method
The electric gate valve is composed of an electric actuator and a gate valve body. The gate plate is controlled by the

gate valve (1)

power supply pressure to perform up and down linear operation to connect or close the fluid medium in the pipeline. The applicable pressure, temperature and caliber range are large, and it is especially suitable for Medium and large diameter pipes. Electric gate valves can be divided into various series. The actuators have on-off type and intelligent type, and the structure is very changeable. When selecting the type, the user should be familiar with the electric gate valve model preparation instructions to avoid selecting the wrong model, placing the wrong order and technology Unknown parameters caused problems such as exchange and return.
Electric gate valve model preparation instructions are mainly for the detailed explanation of the additional conditions of the gate valve, drive mode, connection form, structural feature, sealing material, pressure level and valve body material. Other customized or special product models are not applicable to this method. , Additional explanation is required.
The method of preparing the model of the electric gate valve:
Additional code for gate valve: WZ means bellows gate valve, DZ cryogenic gate valve, NKZ vacuum gate valve, PZ knife gate valve;
Type of gate valve: Z;
Drive mode: manual without code (usually omitted according to regulations), 2 electro-hydraulic, 3 worm gear, 5-bevel gear transmission, 6 pneumatic, 9-electric;
Connection mode: 4 flange connection, 6 welding, 7 pair clip type;
Structural form: 0 elastic gate, 1 open-rod wedge-type single gate, 2-open-rod wedge-type double gate, 3-open-pole parallel single gate, 4-open-pole parallel double gate, 5 concealed Rod wedge single gate, 6 concealed rod wedge double ram, 7 concealed rod parallel single ram, 9 concealed rod parallel double ram;
Sealing material: W valve body is directly processed, T alloy, X rubber, F fluoroplastic, H-Cr stainless steel, Y cemented carbide, M Monel alloy;
Pressure rating: PN1.0-32Mpa, 16=1.6MPA means the pressure is 16 kg, 150LB-1500LB means the American

standard pound pressure, 5-63K means the Japanese pressure;
Valve body material: Z-gray cast iron, Q ductile iron, T alloy, C carbon steel, P stainless steel 304, R stainless steel 316, V chromium molybdenum vanadium steel.

electric stainless steel gate valve

Description of electric gate valve model preparation:
Z941H-16P Stainless steel electric flange gate valve1. Z: represents gate valve;
2. 9: indicates that the transmission mode is electric;
3. 4: The connection method is flange connection;
4. 1: The structure is an open pole wedge single gate;
5. H: The sealing material is stainless steel;
6. 16: Indicates that the nominal pressure is 1.6MPa;
7. P: indicates that the valve body material is stainless steel.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Gate valve model meaning and representation method

July 22, 2021

Gate valve model representation method | Gate valve model meaning
Explanation of the meaning of the gate valve model:

pneumatic gate valve (3)

Gate valve is one of the more common types of shut-off valves. It is generally suitable for full-open or full-close two-position operation control. It is mainly used to close the medium in the pipeline. It is usually called a cut-off valve or a blocking valve. With the increase in demand for valves and the expansion of demand in the machinery industry, gate valves have become an indispensable part of modern industrial control systems. For more and more complex working conditions and harsh use requirements, the correct selection of gate valve models is related to the adaptability of the pipeline medium and an important guarantee for the safety of the working conditions. The user should have a detailed understanding of the method of preparing the gate valve model to avoid problems such as selecting the wrong model, placing the wrong order, and unclear technical parameters resulting in replacement and return.
This compilation method is the representation method of the standard gate valve model in my country. It mainly explains in detail the additional conditions of the gate valve, drive mode, connection form, structural feature, sealing material, pressure level and valve body material. Other customized or special product models are not applicable to this method and need to be explained separately.
The method of formulating and expressing gate valve model:
Additional code for gate valve: WZ means bellows gate valve, DZ cryogenic gate valve, NKZ vacuum gate valve, PZ knife gate valve;
Type of gate valve: Z;
Drive mode: manual without code (usually omitted according to regulations), 2 electro-hydraulic, 3 worm gear, 5-bevel gear transmission, 6 pneumatic, 9-electric;
Connection mode: 4 flange connection, 6 welding, 7 pair clip type;
Structural form: 0 elastic gate, 1 open-rod wedge-type single gate, 2-open-rod wedge-type double gate, 3-open-pole parallel single gate, 4-open-pole parallel double gate, 5 concealed Rod wedge single gate, 6 concealed rod wedge double ram, 7 concealed rod parallel single ram, 9 concealed rod parallel double ram;
Sealing material: W valve body is directly processed, T alloy, X rubber, F fluoroplastic, H-Cr stainless steel, Y cemented carbide, M Monel alloy;
Pressure rating: PN1.0-32Mpa, 16=1.6MPA means the pressure is 16 kg, 150LB-1500LB means the American standard pound pressure, 5-63K means the Japanese pressure;
Valve body material: Z-gray cast iron, Q ductile iron, T alloy, C carbon steel, P stainless steel 304, R stainless steel 316, V chromium molybdenum vanadium steel.

Knife-gate-valve-1-

Example of preparing gate valve model:
PZ973H-16C Electric Wafer Type Knife Gate Valve

1. PZ: stands for knife gate valve;
2. 9: indicates that the transmission mode is electric;
3. 7: The connection method is a clip-on connection;
4. 3: The structure is an open pole parallel single gate;
5. H: The sealing material is stainless steel;
6. 16: Indicates that the nominal pressure is 1.6MPa;
7. C: Indicates that the valve body material is carbon steel.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Electric ball valve model preparation/code name designation method

June 24, 2021

Electric ball valve model preparation/code name designation method in China.
As an important equipment in the industrial automation control system, the electric ball valve has been used more and more in recent years due to its simple structure and convenient operation. It can not only be used to cut off or connect the medium in the pipeline, but also can be used for fluid Regulation and control! But because of the different working conditions of the pipeline, the electric ball valve models used are all different! The user should have a detailed understanding and cognition of the method of preparing the electric ball valve model!

Pneumatic electric high platform ball valve

This electric ball valve model editing method includes the addition of additional conditions for the ball valve, the selection of the drive mode, the different connection form, the change of the structure form, the type of sealing material, the level of the valve pressure and the valve body material, etc.!
Electric ball valve model representation method:
Ball valve additional code:
V means the spool has a V-shaped structure, D means low temperature, B means heat preservation, P means eccentric structure, U, S and DY mostly mean top-mounted type;
Ball valve name code: Q means ball valve; Ball valve drive code: 2 means electro-hydraulic, 3 means turbine, 6 means pneumatic, 7 means hydraulic, 9 means electric, manual without code;
Code of connection method: 1 means internal thread, 4 means flange type, 6 means welding, 7 means wafer type;
Structure type code:
Floating type: 1 means straight flow channel, 2 means Y-type tee, 4 means L-type tee, 5 means T-type tee;
Fixed: 0 means hemispherical straight through, 6 means four-way flow channel, 7 means straight flow to, 8 means L-type tee, 9 means Y-type tee;
Sealing material code: B babbitt alloy, F fluorine rubber, F46 lining fluorine, H stainless steel, J rubber lining, M Monel alloy, N nylon plastic, Monel P, Y cemented carbide, W valve body directly processed;
Pressure rating code: 16 means the pressure is 16 kg (1.6Mpa) and the maximum can reach 64Mpa; 150LB means the American standard pound pressure, and the maximum pressure rating can reach 2500LB (150LB=1.6MPA/300LB=2.5-4.0mpa/400LB=6.4 mpa/600LB=10mpa); 5K means daily pressure, the maximum pressure is 63K;
Valve body material code: A titanium and titanium alloy, C carbon steel, I chromium molybdenum steel, P18-8 series stainless steel, RMo2Ti series stainless steel, S plastic.
Editing instructions for electric ball valve model:
VQ947F-16P Stainless steel electric flange V-shaped ball valve
1. V: indicates that the spool has a V-shaped structure
2. Q: represents the ball valve;
3. 9: indicates that the transmission mode is electric;
4. 4: The connection method is flange connection;
5. 7: The structure is a fixed straight flow channel;
6. F: The sealing material is fluorine rubber;
7. 16: Indicates that the nominal pressure is 1.6MPa;
8. P: indicates that the valve body is made of stainless steel.

More details for valve model establishment, you can visit another article: https://www.tanghaivalve.com/valve-model-establishment-and-meaning/

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Check valve model designation method

October 21, 2020

Check valve model representation method Check model preparation instructions
Check valve (one-way valve) model compilation instructions:
Check valve (one-way valve) is also called check valve or reverse flow valve. It is an automatic valve that opens or

tilting disc swing check valve (3)

closes the disc through the flow of the medium itself, and can only flow in one direction and cannot be reversed. It is mainly used for In the piping system, prevent the medium from flowing back or flowing backward. Check valves have a wide range of uses and types. Different types of check valves are also different in different pipelines, operating conditions and connection methods. In order to avoid selecting the wrong model when purchasing a valve, and causing unnecessary working conditions during the application process due to improper model selection, users should have more understanding and awareness of the following check valve model preparation instructions. Check valve (check valve) model compilation instructions are mainly to make a detailed analysis of the additional conditions, connection methods, structural forms, sealing materials, pressure ratings and shell materials of the check valve. Hope it helps you when you buy check valves.

Check valve (check valve) model representation method:
Additional code of check valve: HH: micro-resistance slow-closing check valve, BH: heat preservation check valve, HQ: rolling ball check valve;
Check valve code: H stands for check valve;
Connection code: 4 flanges, 6 welding, 7 wafer;
Code of structural form: 1: lift type, 2: vertical type, 4: swing type, 6: double flap type, 8: butterfly type;
Sealing material code: B: babbitt alloy, F: fluorine plastic, H: stainless steel, M: Monel alloy, X: rubber, Y: cemented carbide, W: direct processing;
Pressure grade code: 16=16 kg pressure, PN1.6-25mpa, pound grade 150LB-2500LB, Japanese grade 5K-63K;
Shell material code: Q: ductile iron, C: carbon steel, P:304, R:316, A: titanium alloy, I: chromium molybdenum steel;

Example of model preparation of check valve (check valve):
H44H-16C swing flange check valve
H: indicates the check valve;
4: Flange link;
4: Swing type;
H: The sealing material is stainless steel;
16: The pressure is 16 kg (1.6mpa)
C: The valve body is carbon steel.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Valve model establishment and meaning (2)

October 20, 2020

In the previous article, we have introduced the establishment of code number of the valve model in China. However, there are more and more types of valves and materials, and the compilation of valve models is becoming more and

U-type flange butterfly valve, ductile iron, DI, center line,

more complicated. Although China has a unified standard for valve model formulation, it is gradually unable to meet the needs of the development of the valve industry. At present, valve manufacturers generally adopt a unified numbering method; each manufacturer that cannot use a unified numbering method can develop its own numbering method according to its own situation.
Here we mainly introduce the method of Chinese valve numbering, and we will give examples.
For example, the Z543H-16C bevel gear drive, flange connection, flat gate valve, nominal pressure 1.6MPA, valve body material is carbon steel.
Please refer to the previous article for the specific number code: Valve model establishment and meaning

Unit One , valve type (code name):

butterfly valve	safety valve	Diaph-ragm valve	ball valve	gate valve	check valve	plug valve	Pressure reducing valve	globe valve	filter	Disch-arge valve
D	A	G	Q	Z	H	X	Y	J	GL	FL

Unit two, valve drive mode (code name):

drive mode	Electro-magne-tism	Electro-magnetic hydraulic	Electro-hydraulic	tur-bine	Spur gear	Bevel gear	pneu-matic	Hydr-aulic	Gas-hydr-aulic	elec-tric	han-dle	Hand-wheel
code	0	1	2	3	4	5	6	7	8	9

Unit three, valve connection method (code name):

connection	internal thread	external thread	two different connections	flange	welding	wafer	clamp	ferrule
code	1	2	3	4	6	7	8	9

Unit Four, valve structure (code name):

Butterfly valve structure (code name):

butterfly structure		butterfly code	butterfly structure		butterfly code
sealed	singl eccentric	0	unsealed	single eccentric	5
	center vertical plate	1		center vertical plate	6
	double eccentric	2		double eccentric	7
	triple eccentric	3		triple eccentric	8
	linkage mechanism	4		linkage mechanism	9

Another example: D341X-16Q: Double flange butterfly valve, worm gear, soft centerline seal, nominal pressure 1.6Mpa, valve body material is ductile iron
Another example: D371X-10C: Wafer butterfly valve, turbo drive, soft centerline seal, nominal pressure 1.0MPA, and the valve body material is cast steel.
The valve number has 7 digits, and each position has a different code, so there are many changes in the valve, and the price will not be too uniform. And these 7 codes can’t represent the details of all materials. In addition to these 7 codes, there are many components that will greatly affect the use of the valve and the cost and price of the valve, such as the material of the valve plate, the material of the valve shaft, and the length of the valve structure.
Therefore, in the valve industry, there are many special products that need to be customized, and individual inquiries need to be checked separately, and special circumstances require special treatment.

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Valve model establishment and meaning

September 27, 2020

The latest valve model compilation method
Nowadays, there are more and more types of valves and materials, and the compilation of valve models is becoming

ductile iron, DI, butterfly valve, manufacturer, center line, TH valve

more and more complicated. The standardization of valve models provides convenience for valve design and selection. Although my country has a unified standard for valve model compilation, it is gradually unable to meet the needs of the development of the valve industry. At present, valve manufacturers generally adopt a unified numbering method; if a unified numbering method cannot be used, each manufacturer can work out a numbering method according to its own situation.
The valve model compilation method specifies the valve model description, valve type, drive mode, connection form, structure form, sealing surface material, pressure and the expression method of the valve body material code. The valve model preparation method is suitable for all kinds of pipeline valves such as gate valves, globe valves, throttle valves, butterfly valves, ball valves, diaphragm valves, plug valves, check valves, drain valves, plunger valves, pressure reducing valves, traps, and safety valves. product. Standard valve model representation method The valve model compilation method should usually indicate the valve type, drive mode, connection form, structural characteristics, nominal pressure, sealing surface material, valve body material and other elements.
Unit One , valve type (code name):

butterfly valve	safety valve	Diaph-ragm valve	ball valve	gate valve	check valve	plug valve	Pressure reducing valve	globe valve	filter	Disch-arge valve
D	A	G	Q	Z	H	X	Y	J	GL	FL

Unit two, valve drive mode (code name):

drive mode	Electro-magne-tism	Electro-magnetic hydraulic	Electro-hydraulic	tur-bine	Spur gear	Bevel gear	pneu-matic	Hydr-aulic	Gas-hydr-aulic	elec-tric	han-dle	Hand-wheel
code	0	1	2	3	4	5	6	7	8	9

Unit three, valve connection method (code name):

connection	internal thread	external thread	two different connections	flange	welding	wafer	clamp	ferrule
code	1	2	3	4	6	7	8	9

Unit Four, valve structure (code name):

Butterfly valve structure (code name):

butterfly structure		butterfly code	butterfly structure		butterfly code
sealed	singl eccentric	0	unsealed	single eccentric	5
	center vertical plate	1		center vertical plate	6
	double eccentric	2		double eccentric	7
	triple eccentric	3		triple eccentric	8
	linkage mechanism	4		linkage mechanism	9

Gate valve structure (code name):

gate valve structure types				gate valve code
valve stem lift type	Wedge gate plate	Flexible gate plate		0
		rigid gate plate	single gate	1
			double gates	2
	Parallel gate plate		single gate	3
			double gates	4
non-lifting valve stem	Wedge gate plate		single gate	5
			double gates	6
	Parallel gate plate		single gate	7
			double gates	8

Ball valve structure (code name):

ball valve structure		code	ball valve structure		code
floating ball	Straight flow channel	1	fixed ball	Straight flow channel	7
	Y type three-way channel	2		four-way channel	6
	L type three-way channel	4		T type three-way channel	8
	Y type three-way channel	5		L type three-way channel	9
				Hemisphere through	0

Check valve structure (code name):

check valve structure		code	check valve structure		code
lifting disc	straight flow channel	1	swing disc	single disc	4
	vertical structure	2		multiple discs	5
	angle channel	3		double disc	6
			butterfly type check valve		7

The structure of stop valve, throttle valve and plunger valve (code name):

globe valve structure		code	globe valve structure		code
disc type unbalanced	straight flow channel	1	disc type balanced	straight flow channel	6
	Z channel	2		angle channel	7
	three-way channel	3
	angle channel	4
	DC runner	5

Diaphragm valve structure (code name):

diaphragm valve structure	code	diaphragm valve structure	code
Roof circulation	1	straight flow channel	6
DC runner	5	Y type angle channel	8

Plug valve structure (code name):

plug valve structure			plug valve structure
packing seal	straight flow channel	3	oil seal	straight flow channel	7
	T type three-way channel	4		T type three-way channel	8
	four-way channel	5

Safety valve structure (code name):

safety valve structure		code	safety valve structure		code
Spring loaded spring seal structure	full open type with heat sink	0	spring loaded,spring not close, with wrench	micro-open, double valve	3
	micro-open	1		micro-open	7
	full open	2		full open	8
	full open with wrench	4
leverage	single leverage	2	with actuator full open		6
leverage	double leverage	4	pulse		9

Structure of pressure reducing valve (code name):

pressure reducing valve structure	code	pressure reducing valve structure	code
film type	1	bellows type	4
spring film type	2	leverage type	5
piston type	3

The structure of the trap (code name):

trap	trap code	trap	trap code
float ball type	1	steam pressure type or bellows	6
float bucket	3	bimetallic	7
liquid or solid expansion type	4	pulse	8
bell float	5	disc thermaldynamic	9

The structure of the blowdown valve (code name):

blowdown valve structure		code	blowdown valve structure		code
liquid level connection discharge	cut-off straight through	1	Discontinuous discharge	Cut-off type DC	5
	cut-off angle	2		Cut-off straight-through	6
				Cut-off angle	7
				Floating gate type straight-through	8

Unit five, valve sealing material (code name):

material	Babbitt alloy	enamel	Nitrided steel	18-8series stainless steel	Fluoroplastic	hard alloy
code	B	C	D	E	F	Y
material	nylon plastic	monel	lead lining	Mo2Ti stainless steel	plastic	monel alloy
code	N	P	Q	R	S	M
material	glass	copper alloy	Cr13 stainless steel	rubber	lining	valve material machined directly
code	G	T	H	X	J	W

Unit six, valve nominal pressure (code name): The valve nominal pressure value is directly expressed with Arabic numerals, which is 10 times of MPa. The pressure of 1.0MPA is DN=1.0MPA and the nominal pressure is 10kg. Indicates the nominal pressure of the valve!
Unit seven, valve body material (code name):

valve body material	Titanium and titanium alloys	carbon steel	Cr13 series stainless steel	Chrome-molybdenum steel	malleable cast iron	aluminum alloy
code	A	C	H	I	K	L
valve body material	ductile cast iron	Mo2Ti series stainless steel	plastic	copper and copper alloy	18-8series stainless steel	grey cast iron
code	Q	R	S	T	P	Z

TH Valve is a professional manufacturer of butterfly valve, gate valve, check valve, globe valve, knife gate valve, ball valve with API, JIS, DIN standard, used in Oil, Gas, Marine industry, Water supply and drainage, fire fighting, shipbuilding, water treatment and other systems, with Nominal Diameter of DN50 to DN1200, NBR/EPDM/VITON, Certificates & Approvals: DNV-GL, Lloyds, DNV, BV, API, ABS, CCS. Standards: EN 593, API609, API6D

Code of valve sealing or lining material

September 16, 2020

The sealing surface of the valve mainly refers to the contact surface of the valve disc and the valve seat. The sealing

marine valve seat

element plays the role of cutting off and connecting, adjusting and distributing, separating and mixing the medium on the valve passage, and improving the quality and service life of the valve sealing surface. Appropriate sealing surface materials and reasonable sealing structure must be selected. Valve sealing ring materials are mostly mixed materials, and seals of different components have different effects. When selecting valves, customers should choose corresponding seals according to the actual conditions of the medium, temperature and pressure.

code	sealing material/lining material
T	Copper alloy
X	Rubber
N	Nylon plastic
F	Fluoroplastic
B	Babbitt alloy
H	Alloy steel
D	Nitrided steel
Y	Hard alloy
J	Lining
Q	Lead lining
C	Enamel
P	Boronized steel

Note:

1. The code of the valve seat sealing material directly processed by the valve body is coded by “W”.
2. When the sealing materials of the valve seat and the valve disc (valve plate) are different, it is indicated by the code of low hardness material (except for diaphragm valves).

Posts

Representation method of electric gate valve model

Gate valve model meaning and representation method

Electric ball valve model preparation/code name designation method

Check valve model designation method

Valve model establishment and meaning (2)

Valve model establishment and meaning

Code of valve sealing or lining material

TH VALVE • PROFESSIONAL VALVE MANUFACTURER

GET IN TOUCH WITH US